PZEM-002 80-260VAC Digital Power Meter / Digital Watt Meter
This product is an all in one instrument that can display voltage, current and Wattage in KWH. It can also record power consumption over a designated time period and ring its’ internal alarm when it detects overload on the circuit. Essentially it is a power meter you often find outside your house, however this one can run only up to 260VAC with a maximum wattage of 4.4KW.
Alternatively you can check how much wattage your devices are consuming in the house. i.e wattage your computer draws or kitchen fridge.
Key Functions:
UP : If in normal mode > short press will cycle through display time, power, energy, current and voltage readings
If in power alarm mode > short press will increase time by 1 second
If in reset state > will exit reset state
DOWN: if in normal mode > short press will do downwards in cycle for display time, power, energy, current and voltage
If in power alarm mode > short press will reduce the time by 1 second
If in reset state > will exit the reset state
SET: if in power display > long press for 3 seconds will enter into power alarm time setting.
If in energy or time display state > long press for 3 seconds will enter energy or time reset state.
OK: if in normal state > short press will turn on or off the backlight
If in power alarm mode > allow user to edit the values
If in energy or time reset state > short press will clear the energy or time and quit the reset settings.
Specifications:
- Operating Voltage: 80 – 270VAC
- MAX Current: 20A
- Max Wattage: 4400W
- Operating Frequency: 45-65Hz
- Measurement accuracy: +/- 1.0
- Panel Dimensions: 96.40 x 44mm (L X W)
- Screen Dimensions: 55.40 x 30.40mm (L x W)
- Button placement from center of button: 9.70mm
Note: Wiring must be correctly inserted as it does not have any protection circuits integrated to prevent accidental wiring. This device should only be used indoors! This load connect to this device must not exceed the rated wattage!