12VDC Adjustable Wide Angle PIR Motion Sensor
This Module can be used in hall ways, parking garages and rooms to switch the lights on/off when a movement is sensed. Adjustments are for day/night, switching delay, and sensitivity.
Specifications:
- Detection Range: 180°
- Detection Distance: up to 12m @ 25°C
- Working Voltage: 12VDC
- Operating Temperature: –10°C ~ +40°C
- Operating Humidity: Less than 93% RH
- Delay Time: 5 seconds ~ 6 minutes (adjustable)
- Ambient Illumination: 2 ~ 2000LUX (adjustable)
- Installation Height: 1.8m ~ 2.5m
- Material: ABS
- Dimensions: 60 x 45 x 160mm
Adjustment:
1) LUX
Day mode/night mode.
- When adjusted to the sun position, the sensor works all day;
- When it is adjusted to the moon position, the sensor does not work during the day and automatically enters the working state at night.
2) TIME
Is to adjust the sensor delay time (5 ± 2 sec ~ 6 ± 1 min)
The delay time refers to the time when the sensor leaves the sensing area after the sensor senses the person and the sensor delays the time.
3) SENS
It is to adjust the sensitivity of the sensor. Generally no adjustment is needed. If the inductive induction is too strong and the light is always on, the sensitivity can be adjusted to the minimum position.
Wiring instructions:
DC+: Brown
DC-: Blue
Output: Red
Blue and brown Input power
Blue and red connected to the load (lamp).
WARNING
