This device is a RFID reader/writer/copier/duplicator with USB cable supporting 125Khz and 13.56Mhz (IC MODE).
This product is not suitable for bank cards!
This machine only supports 125khz, 250khz, 375khz, 500khz, 625khz, 750khz, 875khz, 1M, HID-125khz,13.56mhz (IC mode) read and copy, supports most IC encryption/decryption cards (but not all). It does not support Copy CUID and FUID chip cards, does not support cards with power supply
Please read carefully and follow the steps below:
How to Crack encryption 13.56Mhz cards:
When the 13.56mhz cards have been encrypted, it should be using the software to crack the cards.
Connected with copier with computer via USB cable,
then Press the "on/off" button,
then the copier will display the "Disclaimer" page.
DO NOT press any button on the Copier;
then your computer will show a removeable disk,
open the disk,
there are the manual and the software.
First, press the "OK" button to agree with the Disclaimer on the computer;
then agree with the copier's "Disclaimer" page;
that will be a successful connection;
put your original cards on the back side of the Read/Write area;
then press the button "scan" to crack the passwords;
after 2 or 5 minutes, the passwords will be cracked successfully,
then put one UID cards in the read/write area;
then press "write" button;
that will be ok.
How to copy the 125khz RFID cards:
Press the "on/off "button;
put the original 125khz cards on the back of the copier;
then the copier will be show the "Disclaimer" page;
Press "ok" button;
then put the cards on the back side of the copier;
then press "scan";
then the copier will auto scan that it is 125khz cards;
and the copier will show the card number;
then we put one writable EM4305 key on the back side of the copier;
then press" Write".
Not supplied:
ID Key ring tag 125 Khz;
IC Keyfobs 13.56Mhz;
ID reader cards 125Khz;
WARNING
