Platform Cable USB, XILINX Programmers & Debuggers
The Platform Cable USB a USB compatible cable for in-circuit configuration and programming of all Xilinx devices. It is compatible with the original XILINX Platform Cable USB.
Key Features
- Performance
- Using CY7C68013A+XC2C256 solution, fully compatible with the original XILINX Platform Cable USB
- Supports all Xilinx devices, FPGA configuration and PROM/CPLD programming
- Supports JTAG, Slave-Serial and SPI
- Interfaces to devices operating at 5V (TTL), 3.3V (LVCMOS), 2.5V, 1.8V and 1.5V
- Selectable target clock frequency, supports software automatic frequency adjustment
- Supported Software
- Xilinx ISE
- iMPACT
- ChipScope
- Supported Devices
- All Xilinx devices, FPGA configuration and PROM/CPLD programming
- Connects to PC
- Computer connection via USB interface
- Connects to target board
- Target board connection via JTAG, Slave Serial, SPI interfaces. The figure below shows the header pinouts of different interfaces:
LED Status
- Red and Purple: USB connected
- Purple: USB connected, and Vref (the target board) is powered
Downloads
Development resources:user manual, software, etc.
Wiki: www.waveshare.com/wiki/Platform_Cable_USB
Package Content
Weight: 0.193 kg
- Platform Cable USB × 1
- JTAG adapter × 1
- USB cable × 1
- 8-pin to 7-pin separated cable × 1
- 14-pin (2.54mm pitch) JTAG cable × 1
- 14-pin (2mm pitch) JTAG cable × 1
- 10-pin (2.54mm pitch) JTAG cable × 1
- User Guide CD × 1
WARNING
