Our Brands

STM

Newest Items First
15 Per Page
STM32F030C6T6, Arm Cortex-M3 STM32 Development Board Module with 32 Kbytes of Flash memory, 72 MHz CPU
US$7.96
This is a powerful development MCU board by ARM (STM32F103C8T6) The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
In stock
+ −
Add to wish list
STM32F030C8T6, Arm Cortex-M0 STM32 Development Board Module with 64 Kbytes of Flash memory, 48 MHz CPU
US$8.87
This is a powerful development MCU board by ARM (STM32F103C8T6) The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
In stock
+ −
Add to wish list
STM32F103RCT6 ARM STM32 Mini Development Board
US$18.95
This is the Mini Development Board is based on STMicro Chip (STM32F103RCT6).
In stock
+ −
Add to wish list
STM8S103F3P6 High Performance Development Board
US$5.59
ST’s STM8S series of mainstream 8-bit microcontrollers covers a large variety of applications in the industrial, consumer and computer markets, particularly where large volumes are concerned. Based on the STM8 proprietary core, the STM8S series benefits from ST's 130 nm technology and advanced core architecture performing up to 20 MIPS at 24 MHz. In addition to embedded EEPROM and RC oscillators, the rich number of I/Os offered and the performance of its embedded peripherals is recognized as a differentiating key point versus competition.
In stock
+ −
Add to wish list
STM32F030F4P6 Cortex-M0 From STLINK (STM32F030F4P6) Development Board
US$9.05
This board is a STM32F030F4P6 Development Board also known as the Cortex-M0. It is a ARM 32-bit Cortex-M0 CPU with a frequency up to 48 MHz and features a high-speed embedded memory. As a minimal ready-to-run system, this board has a Micro USB power supply interface, ISP/SWD programming/debugging interface, boot mode selection and etc., It also comes with some headers and requires some soldering to get them inserted on.
In stock
+ −
Add to wish list
STM32F103C8 V2 ARM Microcontroller Board STM32F103C8T6
US$18.15
The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN. The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications.
In stock
+ −
Add to wish list
PGM-W-5822 ST-LINK/V2, in-circuit compatible debugger/programmer for STM8 and STM32
US$27.25
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. STM8 applications use the USB full speed interface to communicate with STMicroelectronic's ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
In stock
+ −
Add to wish list
STM32F103C8T6 ARM STM32 Minimum System Development Board Module for Arduino
US$13.60
This is a powerful development MCU board by ARM (STM32F103C8T6) The STM32F103xx medium-density performance line family incorporates the high-performance ARM®Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.
Delivery within 2-3 weeks
+ −
Add to wish list
NUCLEO-F446RE STM32 Nucleo-64 Development Board Supports Arduino and ST Morpho connectivity
US$45.45
The STM32 Nucleo board provides an affordable and flexible way for users to try out new ideas and build prototypes with any STM32 microcontroller line, choosing from the various combinations of performance, power consumption and features. The Arduino connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger and programmer.
Delivery within 2-3 weeks
+ −
Add to wish list
PGM-ST-LINK ST-LINK V2 Mini Emulator/Programmer/Debugger for STM8 and STM32
US$11.19
Unique mini STM8 and STM32 is a great portable and elegant solution for a Emulator/Programmer/Debugger. Using the four possible SWD/SWIM JTAG Pins connect them to your STM8 or STM32 ICs and program any device. You are required to install the driver in order for the device to be detected, we have provided the driver. Simply extract and run the auto run setup file.
In stock
+ −
Add to wish list