WAVE-24004 Raspberry Pi Pico Entry-Level Sensor Kit, Including Pico Expansion Board and 15 common modules, All-in-one

Price:
US$72.57
WAVE-24004
In stock
+
Add to wish list

Raspberry Pi Pico Entry-Level Sensor Kit, Including Pico Expansion Board and 15 common modules, All-in-one

Raspberry Pi Pico Entry-Level Sensor Kit

Including 15 Common Modules Such As LED, Button, Buzzer, Etc.

Out Of The Box As A Whole Kit, Or Can Be Separated To Use Independently

Comes With Online Development Resources And Manual



Features At A Glance

Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards

All-in-one design, all modules are connected to Pico via PCB castellated holes, no soldering or wiring required.

Including 15 common modules such as LED, button, buzzer, etc., which can be separated to use independently

Comes with online development resources and manual (examples for Raspberry Pi Pico C/C++ and MicroPython)

Note: the PH2.0 cables are required for the connection with pico after the modules are separated.

Kit Selection Guide (This kit is the Pico-Sensor-Kit-B;no microcontroller included)


Pico-Sensor-Kit-B 

The pico sensor kit, with IR remote controller, PH2.0 dual-plug 4PIN cable, and PH2.0 4PIN cable.


Raspberry-Pi-Pico-Sensor-Kit-B

On the basis of the Pico-Sensor-Kit-B, it is equipped with Raspberry Pi Pico H and Type A to Micro B USB cable. The Raspberry Pi Pico H is a low-cost, high-performance microcontroller board with flexible digital interfaces. Comes with online development resources and tutorials to help you get started easily.



Raspberry-Pi-Pico-W-Sensor-Kit-B

On the basis of the Pico-Sensor-Kit-B, it is equipped with Raspberry-Pi-Pico-W-M and Type A to Micro B USB cable. Based on Raspberry Pi Pico, Raspberry Pi Pico W comes with a wireless communication module which supports Wi-Fi 4 wireless networks, making it the perfect solution for wireless network control and communication.



RP2040-Plus-Pico-Sensor-Kit-B

On the basis of the Pico-Sensor-Kit-B, it is equipped with RP2040-Plus-M and Type A to Type C USB cable. The RP2040-Plus is based on Pico with onboard 4MB Flash, Type C connector, recharge header, and higher current DC-DC chip, which can meet more application requirements.

Based On Raspberry Pi Pico 

Suitable For Raspberry Pi Pico Series Boards, Adapting 40PIN Color-Coded Header


Pico Expansion Board + 15 Common Modules

Comes With Relevant Resources And Tutorials To Help You Get Started Quickly





All-In-One Design, Out Of The Box 

All Modules Are Connected To Pico Via PCB Castellated Holes, No Soldering Or Wiring Required, Or Can Be Separated To Use Independently

Warm tips: please pay attention to the sharp cuts and fragments when disassembling the modules.

Outline Dimensions

Resources & Services

Wiki: www.waveshare.com/wiki/Pico-Se...

Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov