WAVE-20232, Environment Sensors Module for Raspberry Pi Pico, I2C Bus

The WAVE-20232 is a module for the Raspberry Pi Pico equipped with several sensors that allow it to college a wide arrange of data such as, temperature, humidity, light intensity, UV rays, Motion, Etc.

The Pico-Environment-Sensor gives Raspberry Pi Pico the ability to collect environment data like temperature & humidity, air pressure, ambient light intensity, VOC, UV ray, etc. It can also be used to build a robot that can detect motion and orientation

Raspberry Pi Pico is NOT included.

Features

• Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series
• Onboard TSL25911FN digital ambient light sensor, for measuring IR and visible light
• Onboard BME280 sensor, for measuring temperature, humidity, and air pressure
• Onboard ICM20948 motion sensor, accelerometer, gyroscope, and magnetometer
• Onboard LTR390-UV-1 sensor, for measuring UV rays
• Onboard SGP40 sensor, for detecting ambient VOC
• I2C bus, allows retrieving data by just using two wires
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Specifications

• TSL25911FN DIGITAL AMBIENT LIGHT SENSOR
  
  • I2C address: 0x29
  • Effective range: 0~88000Lux
• BME280 TEMPERATURE, HUMIDITY, AND AIR PRESSURE SENSOR
  
  • I2C address: 0x76
  • Temperature detection: -40 ~ 85℃ (0.01℃ resolution, ±1℃ accuracy)
  • Humidity detection: 0~100%RH (0.008%RH resolution, ±3%RH accuracy, 1s response time, ≤2%RH delay)
  • Air pressure detection: 300~1100hPa (0.18Pa resolution, ±1hPa accuracy)
• ICM20948 MOTION SENSOR (9-DOF: 3-AXIS ACCELEROMETER, 3-AXIS GYROSCOPE, 3-AXIS MAGNETOMETER)
  
  • I2C address: 0x68
  • Accelerometer resolution: 16-bit
  • Accelerometer range (configurable): ±2, ±4, ±8, ±16g
  • Gyroscope resolution: 16-bit
  • Gyroscope range (configurable): ±250, ±500, ±1000, ±2000°/sec
  • Magnetometer resolution: 16-bit
  • Magnetometer range: ±4900µT
• LTR390-UV-1 UV SENSOR
  
  • I2C address: 0x53
  • Response wavelength: 280nm - 430nm
• SGP40 VOC SENSOR
  
  • I2C address: 0x59
  • Measuring range: 0 ~ 1,000 ppm ethanol equivalent
  • Limit condition: < 0.05 ppm ethanol equivalent OR < 10 % preset concentration point (the larger one should prevail)
  • Response time: < 10 s (tau 63 %)
  • Start time: < 60 s
• On-chip humidity compensation support