The WAVE-20159 is an evaluation board designed for Raspberry Pi Pico, it allows you to try several on-chip peripherals of the RP2040.
The Pico-Eval-Board is an overall evaluation solution designed for Raspberry Pi Pico. With 3.5inch 65K colourful LCD display and misc helpful onboard components, this evaluation board allows you to try almost every on-chip peripheral of the RP2040, eliminating the messy wiring.
Raspberry Pi Pico and PH2.0 battery are NOT included.
Features
- Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards
- 3.5inch resistive touch screen, 65K colourful, bringing clear and vivid display effect
- Standard 3.5mm audio jack, for headphones or other audio peripherals
- Micro SD card slot through the SDIO interface, faster access speed than SPI interface
- Integrates battery header and recharge circuit, allows it to keep running without wired power supply
- Other rich resources like a buzzer, photoresistor, and RGB LED...
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)
Specifications
- OPERATING VOLTAGE: 5V
- TOUCH TYPE: resistive
- COMMUNICATION BUS: SPI
- DISPLAY PANEL: IPS
- CONTROLLER: ILI9488/XPT2046]
- RESOLUTION: 480×320 Pixels
- DISPLAY COLORS: 65K colourful
- DISPLAY SIZE: 73.44 × 48.96 mm
- PIXEL SIZE: 0.153 × 0.153 mm
- DIMENSIONS: 86.00 × 57.20 mm
Compatibility
Board and Dimensions
| 1. Raspberry Pi Pico header for direct attaching to Raspberry Pi Pico |
12. 74HC4094 serial to parallel data converter |
| 2. LCD connector for connecting the 3.5inch IPS LCD |
13. ETA6096 battery recharger, 1A recharging current |
| 3. Micro USB connector CP2102 communication or battery recharge |
14. ICM20948 9-axis motion sensor allows posture sensing |
| 4. 3.5mm audio jack headphone interface |
15. LSD0204 voltage level translator, ensuring safe communication between chips on the different operating voltage |
| 5. Micro SD card slot using SDIO interface, faster access speed |
16. XPT2046 resistive touch controller |
| 6. PH2.0 battery header for connecting 3.7V Li-po battery |
17. W2812B RGB LED |
| 7. CP2102 USB to UART converter |
18. Passive buzzer controllable sound frequency |
| 8. SP0503 diode for protecting the chip from ESD |
19. User key a user-defined key connects to GP2 |
| 9. PCM5101A stereo audio DAC chip supports analog audio output |
20. Reset key Pico reset |
| 10. 74HC4040 counter chip for clock frequency division |
21. Photoresistor converting light intensity to a voltage signal, measuring light intensity |
| 11. 74HC04D inverter chip |
22. Indicators PWR: power indicator TXD: CP2102 UART TX RXD: CP2102 UART RX |
Pinout
Shipping List
Weight: 0.071 kg
- Pico-Eval-Board x1
- Standoff pack x1
WARNING
