The WAVE-20036 is a Raspberry Pi Pico module designed to support multiple frequency bands and Communication protocols. Ideal for IoT applications like smart appliances, remote tracking, etc.
The Pico-SIM7080G-Cat-M/NB-IoT is an NB-IoT (NarrowBand-Internet of Things), Cat-M (aka eMTC, enhanced Machine Type Communication), and GNSS (Global Navigation Satellite System) module designed for Raspberry Pi Pico. It supports multiple NB-IoT frequency bands, can be controlled via serial AT commands and supports communication protocols like HTTP/MQTT/LWM2M/COAP, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.
- Standard Raspberry Pi Pico header supports Raspberry Pi Pico series boards
- UART communication, serial AT commands control
- Communication protocol support: TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT...
- GNSS positioning support: GPS, GLONASS, BeiDou, and Galileo
- Integrates 3.7V Li-po battery connector and recharge circuit, allows being powered from external rechargeable Li-po battery, or recharge it in turn
- 2x LED indicators, for monitoring the module operating status
- Onboard Nano SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
- Comes with development resources and manual (MicroPython examples)
Raspberry Pi Pico is NOT included.
The pin headers are NOT soldered by default.
Specifications
| SIM7080G | SIM7020E | |
|---|---|---|
| Applicable region | global applicable | Asia, Europe, Africa, Australia |
| FREQUENCY BAND | ||
| NB-IoT | B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/ B20/B25/B26/B28/B66/B71/B85 |
LTE-FDD: B1/B3/B5/B8/B20/B28 |
| Cat-M | B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/ B19/B20/B25/B26/B27/B28/B66/B85 |
N/A |
| GNSS | GPS, GLONASS, BeiDou, Galileo | N/A |
| DATA RATE | ||
| NB-IoT(Kbps) | 136(DL)/150(UL) | 26.15(DL)/62.5(UL) |
| Cat-M(Kbps) | 589(DL)/1119(UL) | - |
| OTHERS | ||
| Communication protocol | TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT... | |
| Power supply | External Li-po battery OR Raspberry Pi Pico USB port | |
| Battery interface | 3.7V ~ 4.2V | |
| Logic level | 3.3V | |
| Module standalone current | Idle mode: 10mA | Idle mode: 5.6mA |
| Sleep mode: 1.2mA | Sleep mode: 0.4mA | |
| PSM mode: 3.2uA | PSM mode: 3.4uA | |
| Indicator | NET: network indicator Charge: recharge indicator |
|
| Switch | Li-po battery power supply switch | |
| SIM card | NB-IoT / Cat-M card (1.8V ONLY) | NB card (1.8V / 3V) |
| Antenna connector | LTE, GNSS | LTE |
| Dimensions | 73.5 × 24.00mm | |
Compatibility
The Pico Can Be SMD-Mounted (Left), Or Attached Via Female Header (Right)
Connecting With Other Expansion Module And Antenna
Communication
Supports Communication Protocols Including:
- TCP
- UDP
- HTTP
- HTTPS
- TLS
- DTLS
- PING
- LWM2M
- COAP
- MQTT
GNSS Positioning:
- GPS
- GLONASS
- BeiDou
- Galileo
Application Example
Pinout Definition
Shipping list:
Weight: 0.112 kg
- Pico-SIM7080G-Cat-M/NB-IoT x1
- LTE antenna x1
- GPS antenna x1
- 20PIN female pin header x2
- 40PIN male pin header × 1
- 3.7V rechargeable Li-po battery x1
WARNING
