The Waveshare 31536 is the PoE M.2 HAT+ (C) which is a PCIe to M.2 Adapter with PoE Function (C) for Raspberry Pi 5, and which supports NVMe Protocol M.2 Solid State Drive, with High-speed Reading / Writing.
Part No: PoE M.2 HAT+ (C)
* for reference only, the Raspberry Pi 5, network cable and switch are NOT included.
PCIe To M.2 with PoE HAT (C)
Designed For Raspberry Pi 5, Supports IEEE 802.3af/at Network Standard
Adapter For NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing
Specifications
|
PoE power input |
37V ~ 57V DC in |
|
Power output |
GPIO header: 5V 5A (MAX) |
|
Dimensions |
56.5 × 66.0 (mm) |
|
Network standard |
IEEE 802.3af/at PoE |
Product comparison
|
|
|||
|
PoE power input |
37V ~ 57V DC in |
||
|
Power output |
GPIO header: 5V 4.5A (MAX) |
GPIO header: 5V 5A (MAX) |
|
|
Network standard |
IEEE 802.3af/at PoE |
||
|
PoE Transformer Type |
Wire-wound transformer |
Planar transformer |
|
|
M.2 Solid State Drive support |
2230 / 2242 |
2230 / 2242 / 2260 / 2280 |
2230 / 2242 |
|
supported M.2 protocol |
Gen2/3 |
||
|
compatible with official Pi 5 Active Cooler |
No (the product comes with cooling fan and heatsink) |
Yes |
Yes |
|
Booting PI5 From Solid State Drive |
supported |
||
|
Dimensions |
56.5 × 70.0 (mm) |
56.0 × 85.0 (mm) |
56.5 × 66.0 (mm) |
Improves reading/writing speed of your Pi
NVMe Drive Slot Support
* Only supports the NVMe Protocol Solid State Drives.
Connecting to Pi 5 via 16PIN Cable
Based on 16PIN PCIe Interface of Raspberry Pi 5.
Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators
Easy to monitor the Working Status
NVMe Drive Protocol Support
Compatible With 2230 / 2242 Size M.2 Solid State Drive
Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive
Power Over Ethernet
Providing both network connection and power supply
for your Raspberry Pi in one cable
How to Install
Attach the thermal tapes first, then install the Official Active Cooler and fix the HAT
Wiki: PoE_M.2_HAT+_(C)
