WAVE-33062, Dual Ethernet Base Board For Raspberry Pi CM5, Supports 4G / 5G Module, Dual 4K Display Outputs And Dual MIPI Interfaces, PoE Module Support
Dual Ethernet Base Board for CM5
Designed for Raspberry Pi Compute Module 5
Specifications
| CM5 socket | Suitable for all variants of Compute Module 5 |
|---|---|
| Networking | 1000M Ethernet RJ45 port × 1 2500M Ethernet RJ45 port × 1 |
| Connector | Raspberry Pi 40PIN GPIO header |
| USB | USB 3.2 Gen1 × 2 |
| MIPI | 4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector) |
| Video | HDMI port × 2, supports dual 4K display outputs |
| M.2 | M.2 M KEY (PCIe Gen2/3 x 1) |
| M.2 (4G / 5G) | M.2 M KEY, supports connecting 4G / 5G communication module |
| Storage | TF card socket for Compute Module 5 Lite (without eMMC) variants |
| Fan Header | 5V, 4PIN JST-SH PWM fan connector |
| Power Input | 7V~36V wide voltage range DC jack, 5V 5A Type-C port |
| Dimensions | the base board: 99.60 × 87.00 (mm) the case: 104.80 × 90.00 × 29.70 (mm) |
Connecting with Compute Module 5
Standard CM5 socket and color-coded Raspberry Pi 40PIN GPIO header
Suitable for Compute Module 5 Lite / eMMC series module
* for reference only, please refer to the package content for detailed part list
4G / 5G module compatibility
Compatible with communication modules with M.2 B KEY interface
* An additional communication module is required to enable 5G/4G/3G/2G cellular network function, recommended: SIM7600G-H-M.2, SIM8200EA-M2, and SIM8262E-M2.
Supports connecting to M.2 NVMe Drive
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files, supports booting Pi5 from NVME Solid State Drive
* for reference only, please refer to the package content for detailed part list
Applicable M.2 drive sizes
NVMe Drive Slot Support
* Only supports the NVMe Protocol Solid State Drives.
More rich interfaces
Features multiple interfaces including ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY, for easy use
Precise cut-out with clear label
Each cut-out is completely aligned with the connector
Cooling fan included
Comes with cooling fan, combined with the airflow vent, for better heat dissipation
* for reference only, please refer to the package content for detailed part list
Wall mount support
Wall Mount Holes On Two Sides, handy for mounting. Reserved Rail-mount buckle mounting holes on the back for Rail-mount Installation
* for reference only, the rail-mount buckle is not included, please purchase separately if needed
What's On Board
- CM5 socket
Suitable for all variants of Compute Module 5 - 40PIN GPIO header
Suitable for connecting to various HAT / HAT+ modules - M.2 M key
Supports 2242 / 2230 NVMe Solid State Drives or AI modules - Programming
Used for eMMC burning or USB OTG - BOOT switch
ON: burning mode | OFF: normal startup mode - PSW power button
Long press: force power off | Short press: soft power off/on - System indicators
- M.2 M key status indicators
- RTC battery holder
Supports CR / ML 1220 button cell - Dual MIPI interfaces
For connecting to DSI displays or CSI cameras - DC power jack
DC 5.5 2.1 jack, supports DC 7V ~ 36V power supply - M.2 B key
Supports connecting 4G/5G communication module - Dual USB 3.2 Gen1 ports
USB 3.2 Gen1 Type-A ports, up to 5Gbps - FAN header
For connecting cooling fan, 5V, 4PIN JST-SH PWM fan connector - M.2 M key status indicator
Blinks when NVMe drive is active - Dual HDMI ports
Supports dual 4K outputs - PoE header
For connecting PoE module via 1000M Ethernet port - 1000M Ethernet RJ45 port
Supports 10M / 100M / 1000M network - 2500M Ethernet RJ45 port
Supports 10M / 100M / 1000M / 2500M network - USB to 2500M Ethernet chip
- IO-VREF selection
CM5 IO logic level: 3.3V (default) or 1.8V - Other function pins
Hardware disable, write protection, chip address selection - TF card slot
For TF card with pre-burnt image (Lite variant only) - NANO SIM card slot
- USB3.0 HUB
Application Example
Suitable for Raspberry Pi applications in remote communication or industrial situations
* for reference only, display and camera module not included
Outline dimensions
WIKI: www.waveshare.com/wiki/CM5-DUAL-ETH-4G/5G-BASE
