WAVE-33059, Gigabit / 2.5G Dual Ethernet Base Board For Raspberry Pi CM5. Dual RJ45 Ethernet Ports, Supports Dual 4K Display Outputs And Dual MIPI Interfaces
Dual Ethernet Base Board for CM5
Designed for Raspberry Pi Compute Module 5
Specifications
| CM5 socket | Suitable for all variants of Compute Module 5 |
|---|---|
| Networking | 1000M Ethernet RJ45 port 2500M Ethernet RJ45 port |
| Connector | Raspberry Pi 40PIN GPIO Header |
| USB | USB 3.2 Gen1 × 1 USB 2.0 × 2 |
| MIPI | 4-lane MIPI interface × 2 (22PIN 0.5mm FFC connector) |
| Video | HDMI port × 2, supports dual 4K display outputs |
| M.2 | M.2 M KEY (PCIe Gen2/3 x 1) |
| Storage | TF card socket for Compute Module 5 Lite (without eMMC) variants |
| Fan Header | 5V, 4PIN JST-SH PWM fan connector |
| Others | Onboard EEPROM and Encryption chip |
| Power Input | 7V~36V wide voltage range |
| Dimensions | the base board: 109.0 × 91.5 (mm) the box: 114.6 × 91.5 × 32.9 (mm) |
Connecting with Compute Module 5
Standard CM5 socket and color-coded Raspberry Pi 40PIN GPIO header. Suitable for Compute Module 5 Lite / eMMC series module.
* for reference only, please refer to the package content for detailed part list
Supports connecting to M.2 NVMe Drive
Faster reading/writing speed compared to the TF card slot of Raspberry Pi, greatly improving reading/writing efficiency of the system or files. Supports booting Pi5 from NVME Solid State Drive.
* for reference only, please refer to the package content for detailed part list
Applicable M.2 drive sizes
NVMe Drive Slot Support
* Only supports the NVMe Protocol Solid State Drives.
More rich interfaces
Features multiple interfaces including ETH / MIPI / HDMI / Micro SD / USB / M.2 B KEY / M KEY, for easy use.
Precise cut-out with clear label
Each cut-out is completely aligned with the connector.
Cooling fan included
Comes with cooling fan, combined with the airflow vent, for better heat dissipation.
* for reference only, please refer to the package content for detailed part list
Wall mount support
Wall Mount Holes On Two Sides for easy mounting. Reserved Rail-mount buckle mounting holes on the back for Rail-mount Installation.
* for reference only, the rail-mount buckle is not included, please purchase separately if needed
What's On Board
- CM5 socket
Suitable for all variants of Compute Module 5 - 40PIN GPIO header
Suitable for connecting to various HAT / HAT+ modules - Programming
Used for eMMC burning - PSW power button
Long press to force power off, short press to soft power off or on - BOOT button
Press before powering on and release after powering on to enter burning mode - STAT LED
Dual LED indicators - DC power jack
- DC-DC power chip
- M.2 M KEY
Supports 2280 / 2260 / 2242 / 2230 NVMe Solid State Drives or AI modules - M.2 LED
Keeps blinking when NVMe drive reading / writing - MIPI Interfaces
For connecting to DSI displays or CSI cameras - HDMI ports
Supports dual 4K outputs - RTC battery header
For connecting an external RTC battery to maintain real-time clock operation - USB 2.0 HUB chip
- USB 2.0 ports
- USB 3.2 Gen1 port
Supports up to 5 Gbps reading / writing speed - 2500M Ethernet RJ45 port
Supporting 10M / 100M / 1000M / 2500M network connections - 1000M Ethernet RJ45 port
Supporting 10M / 100M / 1000M network connections - FAN header
For connecting the cooling fan, 5V, 4PIN JST-SH PWM fan connector - EEPROM and encryption chip
- USB to 2500M Ethernet chip
- TF card slot
For connecting a TF card with pre-burnt image (Lite variant ONLY) - Other function pins
Hardware disable function, write protection and chip address selection - IO-VREF selection
CM5 IO logic level: 3.3V (default) or 1.8V
Application Example
Suitable for Raspberry Pi applications in remote communications or other industrial situations.
* for reference only, the display and camera module are not included, please purchase separately if needed
Outline dimensions
