Mini USB Blaster Altera Rev. C
This USB-Blaster™ download cable interfaces between a USB port on a host computer and a PCB-mounted Altera® FPGA. This cable transmits configuration data from the PC to a standard 10-pin header connected to the FPGA. The USB-Blaster cable can be used to perform repeat downloading of configuration data to a system during prototyping, or to program data into the system during production.
FEATURES:
- Supports 1.5V,1.8V,2.5V,3.5V and 5.0V.
- Supports all ALTERA products: CPLD (MAX3000, MAX7000, MAX9000 and MAX II);
FPGA (Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K); Active serial configuration device (EPCS1, EPCS4, EPCS16)
---- Now we have tested chip using this tool is: Cyclone (EP1C3, EP1C6, EP1C12, EP1C20) ; Cyclone II (EP2C5, EP2C8, EP2C35) ; Stratix (EP1S10, EP1S20, EP1S25) ; Stratix II(EP2S60) ; FLEX10K(EPF10K10, EPF0K30) ; ACEX1K(EP1K30) ; MAX7000(MAX7128SLC84, MAX7128) ; AETC100(MAX3000, MAX3128) ; MAXII(MAXII240, MAXII570, MAXII1270) ; EPCS (EPCS1, EPCS4, EPCS16) ; EPC (EPC1, EPC4)
- Supports AS, PS and JTAG program (with Verify and BankCheck function).
---- When we tested the chip above, we use the different program mode: JTAG (Cyclone, CycloneII, Stratix II, Flex10K, Acex1K, Max7000 and Max3000); AS (EPCS1, EPCS4, EPCS16); PS (Stratix , Stratix GX )
- Support embedded logic analyzer function of SignalTapII
5.Support NIOS II communication and debugger-- When you use it to debug your Black Gold, it will not show Pop-up warning
- Faster -- about 6 times than ByteblasterII
- USB interface -- you don't need a PC with serial port now
- 100% compatible with Official ALTERA USB Blaster
Contents
1. USB cable one
2. 10-PIN core JTAG data line 1
3. USB-Blaster driver installation instructions.
WARNING
