WIFI-ESP32, ESP32-WROOM-32 Wi-Fi + Bluetooth BLE Low Power IOT Microcontroller, 30 pin, usb micro, CP2102

In stock
Add to wish list

ESP-WROOM-32 Wi-Fi + Bluetooth BLE Low Power IOT Microcontroller DEVKITV1, 30 pin, usb micro connection, CP2102

If you're interested in making your project connect to the web and be part of the grander scheme of IOT (Internet of Things) then this board is the gadget for you! Like other microcontrollers and microprocessors, the ESP32 now has built in power regulation circuits, on board antennas and noise filters and fits snuggly onto a breadboard for rapid prototyping. The ESP32 can interface with other MCUs as master or slave or function completely standalone through SPI/SDIO, I2C and UART. The microcontroller can also support an SD card and multiple sensors with its 32 GPIO pins (all of which can be used for PWM).

This microcontroller has TWO microprocessor inside the metal RF shield as one will act as the co-processor. You have the capability of turning off the main processor when not in use to save power. This microcontroller is close to the same package size of an Arduino Nano, yet deliver features and capability that put its’ competitors to shame.

This microcontroller runs on the AT command, but why stop there. Thanks to the espressif and  the git community you are able to have it running in the Arduino IDE. Simply select the board from the menu and the port option like any normal Arduino device and play with some example files provided! 

With pre-soldered breadboard headers and built-in USB-serial adapter, all you need is a microUSB cable to connect it to your computer. No external programmer necessary


  • Operating Voltage: 2.2 to 3.6VDC
  • Ultra-low power consumption
  • 32 GPIO:  ADC(12), DAC(2), SPI(3), I2S(2), I2C(2), UART(3), PWM(32), SDIO(50 Mhz)
  • 520 KB SRAM
  • 16 MB Flash
  • 802.11BGN HT40 WiFi Transceiver (-98 dBm minimum sensitivity)
  • Max data rate: 150 Mbps
  • -40°C to 125°C operating temperature
  • 55.3mm x 28.0mm x 12.3mm
  • 9.6g

Datasheet: https://espressif.com/en/products/hardware/esp32/overview

Resources: https://espressif.com/en/products/hardware/esp32/resources

Arduino Board Installation Guide:

                Windows: https://github.com/espressif/arduino-esp32/blob/master/doc/windows.md

                Mac: https://github.com/espressif/arduino-esp32 (scroll down to installation sub title)

                Linux: https://github.com/espressif/arduino-esp32 (scroll down to installation sub title)

Notice for California Residents: Warning symbolWARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov