ESP32-S3 Mini Development Board, Based On ESP32-S3FH4R2 Dual-Core Processor, 240MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5.
Specifications:
- Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency.
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE).
- Built-in 512KB of SRAM and 384KB ROM, onboard 4MB Flash memory and 2MB PSRAM.
- Castellated module and onboard ceramic antenna allow soldering direct to carrier boards.
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios.
- Integrated with USB serial port full-speed controller, 34 × GPIO pins allow flexibly configuring pin functions.
- 4 × SPI, 2 × I2C, 3 × UART, 2 × I2S, 2 × ADC, etc..
- Supports C, C++, Micropython.
Board Diagram
- ESP32-S3FH4R2 dual-core processor: Up to 240MHz operating frequency
- USB Type-C Port
- ME6217C33M5G: Low dropout LDO, 800mA (Max)
- WS2812 RGB LED
- 2.4G ceramic antenna
- BOOT button: Press it and then press the RESET button to enter download mode
- RESET button
- ESP32-S3FH4R2 pins
Pin Definition
Board Dimensions
WARNING
