Our Brands

E-Textiles

1 2 3 4
Newest Items First
15 Per Page
ARD-LP-23 LilyPad Blue LED Module- 3VDC (5pcs)
CA$3.37
This is a simple pack of five Blue LilyPad LEDs that allow to be sewed into clothing or whatever else you can dream up.
In stock
+ −
Add to wish list
ARD-LP-24 LilyPad Red LED Module- 3VDC (5pcs)
CA$3.37
This is a simple pack of five Red LilyPad LEDs that allow to be sewed into clothing or whatever else you can dream up.
In stock
+ −
Add to wish list
ARD-LP-FTDI LilyPad FTDI Basic Module - 5V 
CA$10.14
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with Arduino boards. It can also be used for general serial applications!
In stock
+ −
Add to wish list
ARD-LP-12 LilyPad ATtiny85 Development Board
CA$18.64
The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even though it’s as small as some of the LilyPad sensors, this board actually has an ATtiny microcontroller on it so it’s actually pretty powerful for its small size! 
In stock
+ −
Add to wish list
ARD-LP-RGB RGB LED Module for Arduino LilyPad
CA$2.75
LilyPad Arduino is about making technology wearable. This particular module offers you a Tri-Color LED on a sewable board that you can attach onto your favourite clothing.
In stock
+ −
Add to wish list
ARD-LP-BUZ LilyPad I/O Buzzer
CA$3.60
LilyPad I/O Buzzer This is a small buzzer for the LilyPad system. It uses two I/O pins on the LilyPad main board to create different noises based on the...
In stock
+ −
Add to wish list
DEV-10867 Conductive Thread Bobbin - 30ft (Stainless Steel)
CA$6.00
This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. 30 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat.
In stock
+ −
Add to wish list
ARD-LP-KIT Arduino Developer LilyPad Kit
CA$67.60
This is an awesome kit for those who want to do sewing conductible projects with fancy light or want to get started with wearable projects. The lilypad is a variant of Arduino microcontrollers designed for users to make such wearable projects come to life. This kit comes with the following items listed below and will work with Arduino IDE. You may require an FTDI programmer to get it up and running! This product is highly recommend for users after they try their code in Arduino uno as it is almost the same and the code will transfer easily onto this device!
In stock
+ −
Add to wish list
ARD-LP-20 White LilyPad LEDs Module (5pcs)
CA$3.37
The following is a set of bright white LilyPad LEDs that can be detached from each other to be used as you desire. There is a total of 5 pieces per set (5 LEDs). They are very compact but reasonably bright for their size. Great for any e-textile LilyPad projects needing some illumination. Each LED needs between 3VDC and 5VDC 40mA (don’t exceed or else LED will stop working).
In stock
+ −
Add to wish list
ARD-LP-15 LilyPad Arduino with USB based on ATMEGA32U4
CA$24.12
This LilyPad development board makes use of the Arduino ATmega32U4 chip and is great for any and all e-textile projects. This design in particular is an updated and more modern version of the LilyPad simple. It has all the features you can except from your traditional Simple (which include a JST connector for your lipo battery holders that can also charge your batteries and a power slide switch to turn off or on the board at your discretion) and more. This time around you won’t need to interface using FTDI anymore because the IC on-board has integrated USB support. Simply connect your system using a micro-USB cable and you’ll be ready to program using ARDUINO IDE software, which now supports LilyPad USB. The board itself includes only a few of the pin outs you can expect from an Arduino ATmega32U4 system (A2 to A5, pin 2-3, pin 9-11, + and - , look at pinout). All you need is a 2.7V to 5V supply to power it. It even comes with a reset switch on the board. The minimalist and low-profile design of the LilyPad 32U4 makes it a perfect choice for projects looking to embed a microcontroller board onto textile surfaces. The large pin-out pads simplify the task of making connections using conductive thread.
In stock
+ −
Add to wish list
ARD-LP-10 LilyPad Arduino based on ATMEGA328
CA$21.73
This Lilypad development board makes use of the Arduino ATMEGA328P chip and is great for any and all e-textile projects. The board itself includes all the pin outs you can expect from an Arduino system (A0-A5, D0-D13, + and -). All you need is a 2.7V to 5V supply to power it and each pin can be programmed using FTDI or ICSP interface with the help of Arduinos IDE software. It even comes with a reset switch on the board. The minimalistic and low-profile design of the Lilipad 328 makes it a perfect choice for projects looking to embed a microcontroller board onto textile surfaces. The large pin-out holes simplify the task of making connections using conductive thread.
In stock
+ −
Add to wish list
ARD-LP-05 LilyPad 20mm (CR2032) Coin Cell Battery Holder with Slide Switch
CA$3.30
Looking to supply your Lilypad project with coin cell batteries? Want the ability to it turn off and on as well? This board may be the answer you’re looking for. It shares a similar PCB design to the version with no switch, which comes with the usual 4 sewing connection points (2x positive and 2x negative) and a 20mm Coin cell battery holder (CR2032). This time however thanks to a sturdy Lilypad slide switch (not easily turned off and on), you can enjoy the benefits of being able to save battery life for your application.
In stock
+ −
Add to wish list
ETEX-01 Wearable Conductive Sewing Thread 1M
CA$2.19
This thread is a stainless steel conductive thread suitable for sewing wearable projects with the Arduino Lilypad. Specifications: 1m, Stainless steel, 15g, Silver color.
In stock
+ −
Add to wish list
DEV-13814 Smooth Thread Bobbin - 12m (Stainless Steel)
CA$8.37
This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost of buying an entire spool of thread. Close to 40 feet of thread is enough to get a simple design stitched onto your shirt, backpack or hat.
In stock
+ −
Add to wish list
DEV-13343 LilyPad Reed Switch
CA$7.16
The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same manner that you can currently use the LilyPad Button and Switch. In order to make it more durable for wearable use, we’ve used a different style of reed switch, which is insulated.
In stock
+ −
Add to wish list
1 2 3 4