The WAVE-20645 is a small module that allows you to convert USB type C to UART module.
Features
- Adopts PL2303GS new version device
- Supports windows XP/7/8/10/11/...
- 3x VCCIO power mode via jumper setting:
- VCCIO - 5V: 5V output
- VCCIO - 3.3V: 3.3V output
- open the jumper: powered from target board (1.8V/2.5V/3.3V/5V)
- 3x LED indicators: TXD, RXD, PWR
Hardware Connection
- VCCIO ↔ 3.3V or 5V output (the module is powered from USB, and the onboard jumper should be shorted to 3.3V or 5V)
- GND ↔ GND
- TXD ↔ MCU.RX (signal direction: MCU.RX << PL2303 << PC.TX)
- RXD ↔ MCU.TX (signal direction: MCU.TX >> PL2303 >> PC.RX)
- NOTE: The module is compatible with TTL level ONLY.
Do NOT connect directly to an RS232 circuit to avoiding any damage.
Dimensions
Shipping List
Weight: 0.008 kg
- PL2303 USB UART Board (Type C) x1
- 6-pin custom connector jumper wire x1
WARNING
