PSM-271 0-5VDC to 4-20mA Voltage to Current Converter Module
This module is used to convert a 0-5VDC signal to 4-20mA output signal. At 4mA the output voltage is 0VDC and at 20mA the output voltage is 5VDC.
Wiring Guide:
Signal Voltage of 0-5vdc enters in Vin and GND.
Output Current leaves from Pin IOUT and GND.
To power the enter board to do the conversion you need a separate constant 5vdc power source in pin VCC and share with GND.
The board has an LED to indicate when it is powered on.
Adjust using the span potentiometer to tune the input voltage signal.
Adjust the using the zero potentiometer to tune the output current signal by adjusting the gain.
Specifications:
- Output Current Min: 4mA
- Output Current Max: 20mA
- Input Voltage Min: 0VDC
- Input Voltage Max: 5VDC
- Operating Temperature: -10 to 60°C
- Storage Temperature: -20 to 85°C
- Dimensions: 40 x 25 x 12mm (L x W x H)