The DFR0921 is the ULTIMATE block shield for the Arduino. It contained several inputs and outputs for the Arduino Mega which will help you manage any of your projects, loose inputs will never be an issue again.
Has it ever happened to you that you spent a lot of time ascertaining a problem when making projects and finally found out it was just caused by loose wiring? Then, what you may need is a terminal block shield like this!
The shield adopts terminal blocks to secure wires so as to make connections stable and reliable. And multiple 3.3V, 5V, and GND ports are provided for easy wiring. It can be powered by 7~24V voltage without an additional buck-down circuit. The onboard 18pin-FPC socket makes it convenient for connecting a screen.
| FPC PINS | Mega PINS | Description |
| VCC | 5V | 5V |
| BLK | D7 | Backlight |
| GND | GND | GND |
| SCLK | D52 | SPI clock |
| MOSI | D51 | Host output, slave input |
| MISO | D50 | Host input, slave output |
| DC | D2 | Data/command |
| RES | D4 | Reset |
| CS | D3 | TFT Chip Select |
| SDCS | D6 | SD card Chip Select |
| FCS | D25 | Font library Chip Select |
| TCS | D5 | Touch Chip Select |
| SCL | SCL | I2C clock |
| SDA | SDA | I2C data |
| INT | D19 | INT |
| BUSY-TE | D24 | ripstop pins |
| X1 | D23 | custom pin 1 |
| X2 | D22 | custom pin 2 |
FEATURES
- Stable and reliable connection
- Easy wiring
APPLICATIONS
- Commercial Project
- Art Show
SPECIFICATION
- VIN Input Voltage: 7-24V DC
- Max Load Power: 10W
- Terminal Block Pitch: 3.5mm
- Cable Size Range: 26AWG-16AWG
- Wire Strip Length: 5mm
- Screw: M2
- Dimension: 101.5 *53.3 mm/4.00*2.10”
SHIPPING LIST
- Terminal Block Shield for Arduino Mega Due x1
WARNING
