The SparkFun DEV-10915 is a 5V Arduino running the 16MHz bootloader meant for advanced users that understand the limitations of system voltage.
Arduino Pro does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. The Arduino Pro series is meant for advanced users that understand the limitations of system voltage (5V), lack of connectors, and USB off board. The power switch was moved to the side of the board to allow control when a shield is attached. This board does not work with the 5V Arduino shields but does work nicely with our prototyping shield. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.
Please note: The right-angle power switch is fragile. We're working on making the switch stronger. For now, please be gentle.
Features:
- ATmega328 running at 16MHz external resonator. Select 'Arduino Duemilanove w/ 328' to get the delay functions to work correctly.
- USB connection off board
- 5V regulator
- Max 150mA output
- Over current protected
- Reverse polarity protected
- DC input 5V up to 12V
- Resettable fuse prevents damage to board in case of short
- Power select switch acts as on/off switch
Dimensions: 2.1x2.05" (53.34x52.08mm)
Schematic design DEV-10915
WARNING
