Arduino Pro Mini ATmega328P-AU 3.3V Micro controller at 8Mhz
The 3.3V Arduino Pro Mini Micro controller is based on the ATmega328P-AU chip set and runs at 8 Mhz. It comes with two 12 pin headers and one 6 pin
angled connector for header based connections, some soldering is required. Use this 3.3cm by 1.8cm board, which weighs less than 2 grams can be used for any
Arduino application projects you may have in mind.
Preloaded with the boot loader translates to a quick plug and play system, only requires a FTDI Cable at logic level of 3.3V for communication to USB port.
Smaller, loaded with more features and more affordable than the Arduino Uno. Use this board for permanent applications or temporary usage.
Features:
ATmega328P-AU Running at 8MHz with external resonator
Low-voltage board needs no interfacing circuitry to popular 3.3v devices and modules (accelerometers, sensors, etc)
USB connection off board
Supports auto-reset
Includes SMT reset button
3.3V regulator
Max 150mA output
Over Current Protected
Reverse Polarity protected
DC input 3.3v up to 12V
On board Power LED (Green) & Status LED (Red)
Analog ports: (A0, A1, A2, A3) & (A4, A5, A6, A7 flip board to access) total of 8 pins
Digital I/Os: (2- 13) & (TX0/RXI) total of 14 pins
PWM ports: (3, 5, 6, 9, 10, 11) total of 6 pins
DC Current Per I/O pin: 40mA
Flash Memory: 16KB (of which 2KB is used by bootloader)
SRAM: 1KB
EEPROM: 512bytes
*PRE-Packaged in anti-static bag.
Compatible FTDI Connection with:
70-ADA FTDI Serial TTL-232 USB Cable
DEV-09717
WARNING
