ARD-DUE Arduino Due R3 Compatible

ARD-DUE Arduino Due R3 Compatible

The Arduino Due R3 is the third revision of the popular first ARM-based Arduino development board. This board is based on the 32 bit CortexM3 ARM Chipset and you can program the device using the Arduino IDE. Ensure when plugging in the USB cable to connect to note either Native USB Port or Programming Port by looking at the backside of the board. Plug into Computer and in IDE select board according to port connected.

The Arduino Due R3 has 54 digital input/output pins (12 can be assigned as 8-bit PWM outputs), 12 analog inputs, 4 UARTs, an 84MHz clock, USB-OTG capable connection, 2 DAC, ADC 12 bit resolution, 2 TWI, power jack, SPI header, JTAG header and a reset button.

This device only works at 3.3v, if applied 5v you risk the chance of damaging the board. The board does supply as (output only) 5v from the rear Digital I/O pins, make sure not to supply back the 5v into the Due.

Total DC output current on all I/O lines: 130mA

DC current for 3.3v pin: 800mA

DC current for 5V pin: 800mA

Flash Memory: 512KB

SRAM: 96KB (64KB + 32 KB banks)

Please note that this is not a Made in Italy Arduino, but an Arduino compatible.