Our Brands

Robotics - Actobotics/ Servocity/goBILDA

Welcome to ServoCity where you can get the parts you need to bring your ideas to life! From servos to switches, from actuators to Actobotics to goBILDA, we work hard to bring you the best components backed by unparalleled technical support.

78 - 92
86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
94 - 108
Newest Items First
15 Per Page
1/8" to 4mm Set Screw Shaft Coupler Actobotics
US$6.99
Features: Length - 0.75”, Diameter - 0.42”, Bore A ID - 1/8”, Bore B ID - 4mm
In stock
+ −
Add to wish list
1/8" to 3mm Set Screw Shaft Coupler Actobotics
US$6.99
Features: Length - 0.75”, Diameter - 0.42”, Bore A ID - 1/8”, Bore B ID - 3mm
In stock
+ −
Add to wish list
1/8" to 3/8" Set Screw Shaft Coupler Actobotics
US$6.99
Features: Length - 0.75”, Diameter - 0.60”, Bore A ID - 1/8”, Bore B ID - 3/8"
In stock
+ −
Add to wish list
1/8" to 5/16" Set Screw Shaft Coupler Actobotics
US$6.99
Features: Length - 0.75”, Diameter - 0.50”, Bore A ID - 1/8”, Bore B ID - 5/16"
In stock
+ −
Add to wish list
1/8" to 1/4" Set Screw Shaft Coupler Actobotics
US$6.99
Features: Length - 0.75”, Diameter - 0.42”, Bore A ID - 1/8”, Bore B ID - 1/4"
In stock
+ −
Add to wish list
1/8" to 3/16" Set Screw Shaft Coupler Actobotics
US$6.99
Features: Length - 0.75”, Diameter - 0.42”, Bore A ID - 1/8”, Bore B ID - 3/16"
In stock
+ −
Add to wish list
Silicone Shock Oil (30wt)
US$13.60
2oz bottle of Team Associated shock oil for use with oil filled shocks.   Team Associated shock oil is made from 100% pure silicone oil and will not thin out in hot weather or thicken up in cold weather.
In stock
+ −
Add to wish list
Aluminum Robot Shocks (2 pack)
US$23.09
Our 130mm, oil-filled, aluminum shocks are the perfect solution for incorporating a suspension setup into your Actobotics project! The shock body is threaded so that you can adjust the spring tension simply by rotating the spring perch. Progressive rate springs allow you to dial-in just the right amount of pressure. Both ends incorporate a 0.140” bore ball swivel so that you can mount the shocks at various angles for smooth operation without binding. The long 1.45” stroke length means you can maximize the moment arm.
In stock
+ −
Add to wish list
1/4" D-Bore Barrel Hub
US$9.79
The ¼” D-Bore Barrel Hub is a balanced clamping hub that maximizes surface contact on the shaft to provide superior holding force when compared to a standard clamping hub. The increased barrel length also aids in handling greater radial loads. The dual pinch bolts are tucked in tight to minimize the clearance diameter as the hub rotates within an assembly. Patents pending.
In stock
+ −
Add to wish list
Length 0.625 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID)
US$2.23
Length 0.625 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID) Sold in packs of 4.
In stock
+ −
Add to wish list
Length 0.500 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID)
US$2.09
Length 0.500 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID) Sold in packs of 4.
In stock
+ −
Add to wish list
Length 0.375 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID)
US$1.95
Length 0.375 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID) Sold in packs of 4.
In stock
+ −
Add to wish list
Length 0.250 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID)
US$1.81
Length 0.250 in. 1/4" OD Aluminum Spacers for #6 Screw Size (0.140” ID) Sold in Packs of 4.
In stock
+ −
Add to wish list
Drive Wheel Adaptors (Shaft Drive) - 4mm bore
US$8.99
These Drive Wheel Adaptors allow you to attach our line of 2.975” and 4.90” wheels to drive shafts. Simply insert the shaft into the adaptor and tighten the set screw. For the 1/4” bore adaptor, we recommend using our d-shafting and aligning the set screw to the flat part of the shaft - this will give you a better hold. The 6mm bore adaptors work with our standard, precision and HD Premium Planetary Gear Motors. The 4mm bore set is compatible with our Premium Planetary Motors.  These adaptors require a 3/16 hex key (sold seperately).
In stock
+ −
Add to wish list
Drive Wheel Adaptors (Shaft Drive) - 0.250" bore
US$8.99
These Drive Wheel Adaptors allow you to attach our line of 2.975” and 4.90” wheels to drive shafts. Simply insert the shaft into the adaptor and tighten the set screw. For the 1/4” bore adaptor, we recommend using our d-shafting and aligning the set screw to the flat part of the shaft - this will give you a better hold. The 6mm bore adaptors work with our standard, precision and HD Premium Planetary Gear Motors. The 4mm bore set is compatible with our Premium Planetary Motors.  These adaptors require a 3/16 hex key (sold seperately).
In stock
+ −
Add to wish list
78 - 92
86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
94 - 108