Robotics - Actobotics/ Servocity/goBILDA

Welcome to ServoCity where you can get the parts you need to bring your ideas to life! From servos to switches, from actuators to Actobotics to goBILDA, we work hard to bring you the best components backed by unparalleled technical support.

US$3.60
Weight: 46g. Material: Steel. Finish: Zinc-Plated. IP: Patents Pending.
In stock
+
Add to wish list

US$3.63
This flat pattern bracket allows you to create a 135 degree angle between two plates or pieces of channel. The five holes at each end are spaced 8mm apart so they will align with any grid-based part.
In stock
+
Add to wish list

US$7.23
This gusset measures 12mm from the center of the hole to the base on each side. The 12mm length allows the gusset to mount to goRAIL and the other side will be flush with the top edge of the extrusion. Use this part to create attachment points perpendicular to a surface or to support a junction between two parts.
In stock
+
Add to wish list

US$7.23
With a 12mm distance from the base to the hole on one side this part is great for creating overlapping joints with goRAIL. The other side measures 8mm from base to center so if you use it with grid-based components it will keep items on pattern.
In stock
+
Add to wish list

US$7.23
These compact gussets provide a clean and solid way to create or support a 90 degree angle. The counterbore allows button head screws to recess down into the mount far enough to pass one-another during assembly.
In stock
+
Add to wish list

US$8.68
Support a 90 degree joint between two plates, channels or brackets with this gusseted angle mount. Threaded holes on every side ensure it will align with your project but also give you additional mounting points in the corner of your build.
In stock
+
Add to wish list

US$7.23
Steel Gusset-Plates are excellent to have in your corner when you’re attaching parts at 90° to one another. The plates’ eleven 4mm holes on the 8mm grid pattern allow for a nearly unlimited variety of installations–especially when you’re creating or reinforcing junctions.
In stock
+
Add to wish list

US$12.41
This Steel Pulley Bracket can be used to mount a V-Groove Pulley to a Viper-Slide (SKU: 2500-0010-0240 or 2500-0014-0336), as well as provide the ideal spacing between two stages of Viper-Slides in a multi-stage slide assembly, such as in a Viper-Slide Kit. This pack includes four pulley brackets and twelve 5mm length M4 button head screws (SKU: 2802-0004-0005).
In stock
+
Add to wish list

US$8.14
This Threaded Steel L-Bracket can be used as a robust 90° connector or as reinforcement to an existing junction. Both sides have three threaded holes for you to use in versatile installations via M4 screws.
In stock
+
Add to wish list

US$5.78
This steel 90° bracket is a sturdy solution for right angles in your project! The two primary thru-holes (located at 90° to one another) allow for versatile joinings and compact reinforcement of your project’s structure via M4 screws and locknuts. The bonus thru-hole in the bracket’s diagonal face provides for eclectic attachments at 45°.
In stock
+
Add to wish list

US$14.48
This steel 90° bracket is a sturdy solution for right angles in your project. Its 16mm goBILDA pattern thru-holes not only surround each of its 14mm center holes, but also include holes along both sides to provide for even more mounting options! Additionally, its asymmetrical length between perpendicular sides allows for enhanced utility in pan and tilt assemblies.
In stock
+
Add to wish list

US$9.05
This steel angle pattern mount is an excellent solution for robust 90° joints as well as miter gear assemblies. And thanks to the 16mm goBILDA® pattern surrounding its perpendicular pair of 14mm center holes, it gives you a huge variety of mounting options! It also matches the 2.5mm thickness of goBILDA® aluminum U-Channel and plates.
In stock
+
Add to wish list

US$7.23
This angle mount is an integral part of a linear motion build when using v-groove bearings and v-guide inside channel. Notice the slots so that you can achieve the perfect distance between v-groove bearings for a super-smooth, no slop setup. The threaded holes will be flush with the top of the 1120 Series U-Channel and allow easy mounting of other components.
In stock
+
Add to wish list

US$4.33
Weight: 37g. Material: Aluminum. Finish: Clear Anodized. IP: Patents Pending.
In stock
+
Add to wish list

US$4.33
Weight: 25g. Material: Aluminum. Finish: Clear Anodized. IP: Patents Pending.
In stock
+
Add to wish list