Our Brands

Robotics - Actobotics/ Servocity/goBILDA

Welcome to ServoCity where you can get the parts you need to bring your ideas to life! From servos to switches, from actuators to Actobotics to goBILDA, we work hard to bring you the best components backed by unparalleled technical support.

86 - 100
94 95 96 97 98 99 100 101 102 103 104 105 106 107 108
Newest Items First
15 Per Page
535162 Bearing Mount - Pillow Block (5/8" Bore)
US$10.49
Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.625” bore bearing.
In stock
+ −
Add to wish list
535142 Bearing Mount - Quad Block (5/8" Bore)
US$11.19
Quad block bearing mounts attach to the inside of a channel and have a ball bearing with a 5/8” bore for shafts. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.625” bore bearing, and utilize the 0.77” hub pattern.
In stock
+ −
Add to wish list
535122 Bearing Mount - Flat (5/8" Bore)
US$10.49
These flat bearing mounts attach to the face of a channel or plate and have a ball bearing with a 5/8” bore for shafts. They can be used in conjunction with angle brackets to be mounted inside channels or in other configurations. These bearing mounts have a width of 1.31”, a thickness of 0.20”, a 0.625” bore bearing, and utilize the 1.5” hub pattern.
In stock
+ −
Add to wish list
535154 Bearing Mount - Pillow Block (3/8" Bore)
US$9.09
Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.375” bore bearing.
In stock
+ −
Add to wish list
535158 Bearing Mount - Pillow Block (1/2" Bore)
US$9.79
Pillow block bearing mounts attach to the outside of a channel and can be used as simple hinges. These bearing mounts have a width of 1.32”, a thickness of 0.25”, a 0.50” bore bearing.
In stock
+ −
Add to wish list
555124 Motor Mount - C Style
US$6.99
The C Style Motor Mount is a low-profile mount for your standard or precision gear motors. Two screws secure your motor while 2 tapped 6-32 holes allow you to connect to Actobotics channels, or other mounts, hubs, or adapters.These mounts fit flush against channels making them ideal for driving gears or pulleys.
In stock
+ −
Add to wish list
555136 37mm Clamping Swivel Motor Mount (Actobotics)
US$8.87
The 37mm bore of this swivel mount is compatible with several motors such as our Standard Spur Gear Motors, Precision Spur Gear Motors, goBILDA 5200 Motors and Andymark Neverest Classic motors. The single attachment point allows you to rotate the entire amount about that point to achieve proper mesh or tension in your build. This mount is commonly paired with the Clamping Swivel Motor Mount Base which comes with the ¼-20 bolt and nut required to mount by the ¼" hole.
In stock
+ −
Add to wish list
555188 Motor Mount - E Style
US$8.39
The E Style Motor mount connects to the inside of Actobotics channels and works with both standard and precision gear motors. This allows you to drive shafts through channels. The mount utilizes various hole patterns for your motor, and a 1.5" hole pattern for connecting to other Actobotics products. The E Style mount is made from resilient 6061-T6 aluminum and weighs only 0.35oz.
In stock
+ −
Add to wish list
555148 Motor Mount - Swivel Clamp (22mm)
US$8.39
This motor mount connects to other Actobotics products with a swivel mount, allowing you to easily attach your motor to gears or pulleys. A set screw on the swivel mount (sold separately below) allows you to position the motor accurately and lock in its position. You can even rotate the motor inside the mount by loosening the set screw. All these adjustments make for a very versatile mount. This mount works with motors with a 22mm body diameter.
In stock
+ −
Add to wish list
555140 Motor Mount - Swivel Mount
US$5.59
This swivel mount works in conjunction with the clamping swivel motor mounts. A ¼-20 lock-nut holes the motor in place, while 6-32 tapped holes attach the mount to Actobotics channels.
In stock
+ −
Add to wish list
555128 Aluminum Motor Mount B (Actobotics)
US$8.39
Aluminum Motor Mount B has a plethora of holes, and hence, has a broad compatibility. It is compatible with the following mounting patterns: M3 x 25mm bolt circle (2 holes). M3 x 28mm bolt circle (2 holes). M3 x 31mm bolt circle (2 holes, offset 7mm from center).
In stock
+ −
Add to wish list
555156 Stepper Motor Mount - NEMA 14 (Actobotics)
US$9.79
The NEMA 14 Stepper Motor Mount connects to the topside of a stepper motor to make integrating it into your Actobotics project even easier. Thanks to the 0.77" hub pattern this stepper motor mount can attach to Actobotics channels or any other surface with the same hub pattern and can make building your 3D printer or precision camera slide a snap. The mount includes four M3 x 6mm x 0.5mm pitch mounting screws for attaching your stepper motor and has a 0.5" bore.
In stock
+ −
Add to wish list
555116 37mm Bore Bottom Tapped Clamping Mount (Actobotics)
US$9.96
This 37mm clamping mount is a popular option for mounting 37mm diameter spur gear motors. Given the offset shaft of a 37mm diameter spur gear motor, you can rotate the motor within the clamping mount, prior to tightening the pinch bolt, to adjust the location of the motor’s shaft. This is a great option when looking to achieve the proper belt tension, chain tension, or gear mesh within an assembly.
In stock
+ −
Add to wish list
634236 Shaft - Solid (Stainless; 1/2"D x 7"L)
US$7.97
These 7" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8.
In stock
+ −
Add to wish list
634244 Shaft - Solid (Stainless; 1/2"D x 12"L)
US$11.89
These 12" long stainless steel shafts have a diameter of ½". These shafts are solid, which makes them an ideal choice for axles. These shafts have a Rockwell Hardness rating of 8.
In stock
+ −
Add to wish list
86 - 100
94 95 96 97 98 99 100 101 102 103 104 105 106 107 108