TT Right Angle Gear Motor (48:1 Ratio, 230RPM)
These gear motors are an inexpensive way to put your project in motion! The required voltage is 4.5-6V with a no load current of 190mA. The output shaft is 9mm long and the gearbox ratio is 48:1 with a wheel speed of 140 RPM (unloaded). These are the motors used on our popular Runt Rover Robot Kit series. Use with our 2.55" or 3.10" press-fit robot wheels.
Specs
| Output Shaft Style | Double Flats |
|---|---|
| Motor Type | Brushed DC |
| Gear Material | Plastic |
| Wire Length | 12" |
| Weight | 1.02 oz (29g) |
| Wire Gauge | 26awg |
| Voltage (Nominal) | 6VDC |
| No-Load Speed @ 6VDC | 230RPM |
| No-Load Current @ 6VDC | 190mA |
| Stall Current @ 6VDC | 250mA |
| Stall Torque @ 6VDC | 11.11 oz-in (0.8 kg-cm) |
| Gearbox Style | Face Gear / Straight Cut Spur |
| Connector Type | Male Header Pin |
| Gear Ratio | 48:1 |
WARNING
