D-TR-02 5.8GHz 200mW 8 Channel TX and RX FPV pack
This kit will take any camera that operates 7 to 15vdc and transmit up to a range of 2km (depending on the battery and antenna used on an open field). The transmitter is an TS351 also known as TS 58200 designed for 5.8GHz frequency and has 8 specific channels. The receiver is a RC305 also known as a RC5808, capable of delivering audio and video through RCA cables. You have two possible output for video and 8 channels to switch through. The system requires 6.6v~12VDC to operate.
Note: Never power the unit without the antenna connected.
Specifications:
Transmitter:
- Wideband FM Modulate
- Video Format: NTSC
- Characteristics:
- 50Ω Output Impedance
- Min 21dBm Output Power
- Typ 22dBm Output Power
- Max 23dBm Output Power
- Ch1 5705 MHz
- Ch2 5685 MHz
- Ch3 5665 MHz
- Ch4 5645 MHz
- Ch5 5885 MHz
- Ch6 5905 MHz
- Ch7 5925 MHz
- Ch8 5945 MHz
- 7.0VDC Min Voltage
- 12VDC Typ Voltage
- 15VDC Max Voltage
- Current Draw 150mA
- Operating Temperature -10 to 85°C
- Video Bandwidth 0 to 8.0MHz
- Video Input Level 0.8 to 12Vp-p
- 75Ω Video input impedance
- Audio Input Level 2.0 Vp-p
- 10kΩ Audio Impedance
- SMA Antenna socket
- 55x26x17mm (LxWxH)
- Weight of 24.8g
Receiver:
- Channels: 8
- Receiver operating voltage: 5V - 12V
- DC Operating temp: -10~85C
- Video bandwidth: 0~8.0MHz
- Audio frequency: 6.5MHz
- Video input level: 0.8~1.2Vp-p
- Video input impedance: 75Ohm
- Audio input level: 0.5~2.0Vp-p
- Audio input impedance: 10K/Ohm
- Antenna connector: RP-SMA
- Dimensions: 61x52x13mm
- Weight: about 43g
WARNING
