PS-200-24, 200W 24VDC 8.3A Switching Power Supply 110VAC/220VAC .
There is a switch selector to choose applicable voltage- select before use.
|
DC output power |
200W |
198W |
200W |
200W |
200W |
|
Efficiency |
80% |
84% |
84% |
85% |
86% |
|
Adjustable range DC voltage |
4.74-5.5V |
10.8-13.2V |
13.5-16.5V |
21.6-26.4V |
43-53V |
|
Model number |
S-200-5 |
S-200-12 |
S-200-15 |
S-200-24 |
S-200-48 |
|
DC output voltage |
5V |
12V |
15V |
24V |
48V |
|
Output voltage error (note 2) |
±2% |
±1% |
±1% |
±1% |
±1% |
|
Rated output current |
40A |
16.5A |
13.3A |
8.5A |
4.2A |
|
Output current rage |
0-40A |
0-16.5A |
0-13.3A |
0-8.5A |
0-4.2A |
|
Wave and noise (Note: 3) |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
|
Inlet stability (Note: 4) |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Load stability (Note: 5) |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
DC output power |
200W |
198W |
200W |
200W |
200W |
|
Efficiency |
80% |
84% |
84% |
85% |
86% |
|
Adjustable range for DC voltage |
4.74-5.5V |
10.8-13.2V |
13.5-16.5V |
21.6-26.4V |
43-53V |
▇ General
|
Model number |
S-200 series |
|
AC input voltage range |
90-132VAC/180-264VAC, select by switch, 47-63Hz; 248-370VDC |
|
Input current |
3.2A/115V, 1.6A/230V |
|
AC inrush current |
Cold-start current: 25A/115V, 50A/230V |
|
Leakage current |
3.5mA/240VAC max |
|
Overload protection |
105%-150% Type: Foldback current limiting Rest: auto-recovery |
|
Over-voltage protection |
115%-135% Type: hiccup mode Rest: auto-recovery |
|
Temperature coefficient |
±0.03%/°C (0-50°C) |
|
Setup Rise hold up time |
200ms, 100ms, 20ms |
|
Vibration |
10-500HZ,2G 10min/1cycle, Period for 60min, Each axis |
|
Dielectric strength |
1.5KVac, 50/60 Hz for 1 min between input and output |
|
Isolation resistance |
100MΩ min. at 500 VDC |
|
Working temperature humidity |
-10°C-60°C (Refer to output characteristic figure), 20%-90%RH |
|
Store temperature humidity |
-20°C-85°C, 10%-95%RH |
|
External dimension |
199x110x50 mm |
|
Weight |
0.9kg |
|
Safety standards |
refer to UL1012 (not apply to mark) |
|
EMC standards |
FCC part 15J condition level A |
|
Note |
1.5KVac, 50/60 Hz for 1 min between input and output |
WARNING
