PS-360-12 Source de courant commutable avec ventilateur 110/220VAC 12VDC 66A
Ce module d'alimentation comporte 3 output de voltages et des mises-à-terre communs. On vous suggère d’installer la source avec les fils de jauge 14AWG ou 16AWG tressés pour empêcher de surchauffer l’appareil. Pour éviter les dommages, éviter l’étamage des fils et soyez certain de la polarité de vos connections.
CARACTÉRISTIQUES:
|
Model Specification |
S-800-12 |
|
DC Output voltage |
12V |
|
Output voltage range |
+/-1% |
|
Rated output current |
66A |
|
Output current range |
0~66A |
|
Wave and noise(Note:3) |
150mVp-p |
|
Inlet stability(Note:4) |
+/-1% |
|
Load stability(Note:5) |
+/-1% |
|
DC output power |
800W |
|
Efficiency |
84% |
|
Adjustable range for DC voltage |
+/-10% |
|
AC input voltage range |
100~132VAC/190~240VAC 250~340VDC |
|
Input current |
6A/230V |
|
AC Inrush current |
Cold-start current 30A/115V, 60A/230V |
|
Leakage current |
less 3.5mA/240VAC |
|
Overload protection |
105%-150% Type: cut down output Reset: auto recovery |
|
Over-voltage protection |
................. |
|
High-temperature protection |
.................... |
|
Temperature coefficient |
+/-0.03%/.C(0~50.C) |
|
Setup, rise, hold up time |
800ms, 50ms, 10ms/150V 300ms,50ms,80ms/230v |
|
Vibration |
10~500Hz, 2G 10min,/1 cycle. Period for 60min, each axes |
|
Withstand voltage |
I/P-O/P:1.5K VAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|
Isolation resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
|
Working temperature and humidity |
-10.C~ +60.C(Refer to output derating curve), 20%~90%RH |
|
Store temperature and humidity |
-20.C~ +85.C, 10%~95%RH |
|
Overall dimension |
238*124*65mm (L*W*H) |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
