CSA Approved PSB-4618 is a high precision laboratory grade linear power supply with advanced MCU control and USB interface bundled with PC control software and SCPI command sets for remote control, monitoring and data logging or integrating with test instruments via SCPI.
Features
- Variable Output: 0.1-18VDC / 0-6A
- Fixed Output: 12VDC / 0.8A or 5 or 3.3VDC (selectable) / 0.8A
- Constant Voltage or Constant Current with automatic crossover
- Fully isolated outputs
- Output On-Off switch on front panel
- Rotary encoder for easy tuning of voltage and current
- 3 user defined Voltage and Current presets
- Wave form generator
- 4-Digit LED Voltage and Current displays
-
Approval: CSA-Inspection
Specifications
- Variable Output Voltage: 0.1-18V DC
- Variable Output Current: 0-6A
- Voltage Regulation
- Load (10-90% Rated Current): ≤10mV
- Line (±10% Variation): ≤5mV
- Current Regulation
- Load (10-90% Rated Voltage): ≤ 3mA
- Line (±10% Variation): ≤ 2mA
- Ripple & Noise (RMS): ≤ 5mV
- Auxiliary Fix output
- Aux. 1 output: 3.3/5VDC (selectable), 0.8A
- Aux. 2 output: 12VDC, 0.8A
- Tracking Over Voltage Protection:
- O/P ≤ 5V: Set voltage +1V
- O/P > 5V: Set voltage x 120%
- Voltage Setting Resolution: 10mV
- Current Setting Resolution: 1mA
- Accuracy
- Voltage Meter: 4 Digit LED Display (±0.5% +5digits, <10) (±0.5% +2digits ≥10V)
- Current Meter: 4 Digit LED Display (±0.5% +5digits, <0.5A) (±0.2% +5digits ≥0.5A)
- Input Voltage: 120VAC
- Full Load Input Current: ≤ 2A @ 120V AC
- Cooling Method: Thermostatic control fan
- Protections: Overload, Short Circuit by Constant Current, Output Tracking Over Voltage, Over Temperature
- Special Feature: 3 user defined V and I preset, remote V, I, and output on-off
- Presets Cycle Programming: 10 steps waveform generator max. preset cycle 999
- Command Set: SCPI
- Communication Type: USB
- Dimensions (WxHxD): 150x132x260mm (5.9 x 5.2 x 10.2”)
- Weight: 5.1kg (11.2lbs)
- Note: All values are based on the standard ambient temperature 25ºC and pressure 0.1Mpa
