Our Brands

Opto/Illumination

74 - 88
82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
90 - 100
Newest Items First
15 Per Page
292 i2c / SPI character LCD backpack
292 i2c / SPI character LCD backpack
US$14.45
By using simple i2c and SPI input/output expanders we have reduced the number of pins (only 2 pins are needed for i2c) while still making it easy to interface with the LCD.
In stock
+ −
Add to wish list
326 Monochrome 128x64 OLED graphic display
326 Monochrome 128x64 OLED graphic display
US$34.13
These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip.
In stock
+ −
Add to wish list
414 Electroluminescent (EL) Panel - 20cm x 15cm Aqua
414 Electroluminescent (EL) Panel - 20cm x 15cm Aqua
US$61.17
Measures 20 cm x 15 cm (7.9" x 5.9"), about 0.5mm thick. Its covered in what seems to be PVC, the panel is thus spill proof - but note that the connector is NOT waterproof, just a bit of heatshrink. This isn't something we would suggest leaving outdoors for extended periods.
In stock
+ −
Add to wish list
319-ADA In-line power wire connector (male)
319-ADA In-line power wire connector (male)
US$1.74
Its a JST 2.5mm 'free hanging' cable assembly that latches strongly. One wire is marked with a white dashed line. You can't plug these in backwards.
In stock
+ −
Add to wish list
448 12V EL wire/tape inverter
448-ADA 12V EL wire/tape inverter
US$8.67
This is an inverter for EL wire and tape, similar to our pocket inverter, except it is a brick that takes 12V input instead of 2 AA batteries.
In stock
+ −
Add to wish list
402 In-line wire 1-to-4 splitter
402 In-line wire 1-to-4 splitter
US$4.35

This is an in-line wire one to four way splitter, where you can have multiple EL wires connected.

In stock
+ −
Add to wish list
317 EL wire 2xAA pocket inverter
317 EL wire 2xAA pocket inverter
US$11.55
Powers off of 2 AA batteries (not included!), it can drive 1 to 8 feet (about 2.5m) of our high-brightness EL wire for 10 hours. 
In stock
+ −
Add to wish list
772 LCD Shield Kit w/ 16x2 Character Display-Only 2 pins used! BLUE AND WHITE
772 LCD Shield Kit w/ 16x2 Character Display-Only 2 pins used! BLUE AND WHITE
US$34.92
We wanted to make it easier for people to get these LCD into their projects so we devised a shield that lets you control a 16x2 Character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the Arduino!
In stock
+ −
Add to wish list
493 LoL Shield BLUE - A charlieplexed LED matrix kit for the Arduino - 1.5
493 LoL Shield BLUE - A charlieplexed LED matrix kit for the Arduino - 1.5
US$43.67
The LEDs are individually addressable, so you can use it to display anything in a 9 x 14 grid. Scroll text, play games, display images, or anything else you want to do. This kit you will need to assembled / solder it together.
In stock
+ −
Add to wish list
494 LoL Shield WHITE - A charlieplexed LED matrix kit for the Arduino - 1.5
494 LoL Shield WHITE - A charlieplexed LED matrix kit for the Arduino - 1.5
US$43.67
The LEDs are individually addressable, so you can use it to display anything in a 9 x 14 grid. Scroll text, play games, display images, or anything else you want to do. This kit you will need to assembled / solder it together.
In stock
+ −
Add to wish list
286 LoL Shield GREEN- A charlieplexed LED matrix kit for the Arduino - 1.5
286 LoL Shield GREEN- A charlieplexed LED matrix kit for the Arduino - 1.5
US$34.92
The LEDs are individually addressable, so you can use it to display anything in a 9 x 14 grid. Scroll text, play games, display images, or anything else you want to do. This kit you will need to assembled/ solder it together.
In stock
+ −
Add to wish list
55-530-0 3mm Mounting Bezel (1 Piece)
55-530-0 3mm Mounting Bezel (1 Piece)
US$0.27

This is a 3mm mounting bezel for 3mm LEDs.

In stock
+ −
Add to wish list
55-550A-0 5mm LED Holder (Concave)
55-550A-0 5mm LED Holder (Concave)
US$0.97

This is a 5mm concave panel mount holder for 5mm LED.

In stock
+ −
Add to wish list
55-550B-0 5mm LED Holder (Convex)
55-550B-0 5mm LED Holder (Convex)
US$0.55

This is a 5mm convex led holder for 5mm LED.

In stock
+ −
Add to wish list
LED-5RG-3 Bi Color 5mm LED - 3 Leads
LED-5RG-3 Bi Color 5mm LED - 3 Leads
US$0.59

These are 3 pin 5mm Red/Green Bi Colored LEDs.

In stock
+ −
Add to wish list
74 - 88
82 83 84 85 86 87 88 89 90 91 92 93 94 95 96
90 - 100