Our Brands

Opto/Illumination

48 - 62
56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
64 - 78
Newest Items First
15 Per Page
212x104, 2.13inch E-Ink display HAT for Raspberry Pi, three-color
US$26.59
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+ −
Add to wish list
250x122, 2.13inch E-Ink display HAT for Raspberry Pi
US$25.19
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+ −
Add to wish list
200x200, 1.54inch E-Ink display module, three-color
US$23.79
This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+ −
Add to wish list
200x200, 1.54inch E-Ink display module
US$22.39
This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+ −
Add to wish list
LED-STRIP-C25 4 Pin LED Strip to 4 wire solderless crimp connector (Waterproof)
US$3.63
Looking to cut and connect some led strips? This product is perfect if you want to supply power to said LED strip without having to solder wires onto the strip. Simply open the latch for the LED strip to be inserted. Once you place any RGB led strip onto the contacts, apply pressure to close the latch and secure the strip in place. Use the other end latch to secure any pre-striped 22-24AWG cables to be connected to your circuit. *Compatible for 3528 and 5050 LED Strips.
Delivery within 2-3 weeks
+ −
Add to wish list
LED-STRIP-PIR 12-24VDC 8A LED Strip Proximity IR motion sensor switch
US$15.33
Simple and effective, the sensors will act like a switch. It will allow power and current to flow through to the LED when it detect a movement. After some time when there is no movement the switch will create a short circuit effectively turning off the LEDs. You can input 12V to 24VDC and run a max current of 8 amp worth of leds. The unit comes with a orange screw terminal in the front to adjust the timing interval to turn off when a motion is not detected. You can go from a minimum of 1 minute to a max of 10 minutes. Unit comes with a removable terminal strip connector. The two on the left next to output take both polarities that will be feed into the LED circuit. The right side with Input is for direct input of DC voltage.
In stock
+ −
Add to wish list
LED-STRIP-C20 4 Pin LED Strip solderless connector to LED terminal connector (NON Waterproof)
US$1.77
Looking to cut and connect some led strips? This product is perfect if you want to supply power to said LED strip without having to solder wires onto the strip. Simply open the latch on the white connector for the LED strip to be inserted. Once you place any RGB led strip onto the contacts, apply pressure to close the latch and secure the strip in place. The other end is a common led strip connector that is found on our remote modules that offer IR control and power supply, which is sold separately. The cable provided is 10cm long. *Compatible for 3528 and 5050 LED Strips.
In stock
+ −
Add to wish list
DFR0464 Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display
US$20.50
Have you been fed up with Black/White LCD screen? Do you want to try a colorful one? DFRobot I2C 16x2 Arduino LCD with RGB Backlight Display module will bring you a new experience about screen. It comes with RGB full color backlight, which has 16 million kinds of color. Usually, Arduino LCD display projects will run out of pin resources easily, especially with Arduino Uno. And it is also very complicated with the wire soldering and connection. This I2C 16x2 LCD Screen is using an I2C communication interface. It means it only needs 4 pins for the LCD display: VCC, GND, SDA, SCL. It will saves at least 4 digital / analog pins on Arduino. And Gravity interface make it easier to use with our Gravity: IO expansion shield (DFR0265).
In stock
+ −
Add to wish list
DFR0474 Gravity: Digital Colorful Flashing LED Module
US$3.50
Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. It is easy to light up the LED. Turn on the power, then the LED will light up without programming. The built-in controller controls the colors and duration randomly, which makes it shine like a colorful star. Moreover, the module supports cascade control, only one interface can control all LEDs. Gravity Colorful LED, simple but romantic, modest but tasteful. It is really an ideal light to create relaxed and harmonious atmosphere.
In stock
+ −
Add to wish list
LED-STRIP-07 RGBW Non-Waterproof 150 (5050) LED 12VDC Flexible Strip 5M
US$27.93
This led strip is great for mounting on any smooth surface for any festive occasions or projects, it’s composed of 50x50 mm RGBW LEDS that are spaced 1cm apart. We would recommend a 12v 5A power supply or a 12V 1.5A power supply (See related products below) and a IR Receiver and Transmitter to color ranges desired without programming knowledge. The jumpers are removable for the connector of the Led strips allowing you to change which end you want to supply power. It is not sealed for waterproofing and has 3m adhesive on the back, you can cut the strip and reattach the strip by soldering cables. This unit contains analog only RGBW LEDS and does not have the ability to control the LEDS individually, ensure that the white cable supplies VCC only. Please note that the LED strip has 300 leds, however only 150 can be changed to RGB and the leds in-between that make up 300 are designed for white only.
In stock
+ −
Add to wish list
LED-10RGB-4-WC-CC Tri-Color 10mm Common Cathode Water-clear LED - 4 Leads
US$1.25
This is a common cathode water-clear LED. Get unlimited color combinations by varying the voltages applied to the three separate RGB leads. This can easily be controlled using a microcontroller like the Arduino Uno.
In stock
+ −
Add to wish list
LED-10RGB-4-WC-CA Tri-Color 10mm Common Anode Water-clear LED - 4 Leads
US$1.25
This is a common anode water-clear LED. Get unlimited color combinations by varying the voltages applied to the three separate RGB leads. This can easily be controlled using a microcontroller like the Arduino Uno.
In stock
+ −
Add to wish list
IF-E91A LED IR Fiber Optic Transmitter 1.5V 2A 950NM
US$4.61
Current - DC Forward (If) (Max): 50mA. Voltage - DC Reverse (Vr) (Max): 3V. Capacitance: 25pF.
Delivery within 2-3 weeks
+ −
Add to wish list
LCD-5110 84x48 Backlight LCD Module (Arduino compatible)
US$8.39
This is an LCD module capable of displaying graphics (including bitmaps) as well as strings of characters on to a display resolution of 84x48 pixels. It is also comprised of 4 active-low blue backlight LEDs that can be disabled if desired. With only 8 connections to establish, it makes this one of the easier LCD modules to get up and running. It also only requires a max of 3.3VDC to function (do not exceed this limit to avoid burning module) which makes it compatible with most microcontroller units including the notable Arduino boards.
In stock
+ −
Add to wish list
WAVE-11280 10.1 Inch Capacitive Touch LCD 1024x600 LVDS/RGB
US$88.19
This screen is excellent for any A20 based processors like the cubieboard. The screen features a display and touch area that is 1024 x 600 pixels. It comes with a nice black acrylic panel for mounting based on your project needs. Connect the 40 pin LVDS or RGB cable to start using this screen. Specifications: LCD Type: TFT. Interface: RGB/LVDS. Touch Controller: FT5406. Touch Panel Type: Capacitive (5-Multi Touch Feature). BackLight: LED. Display Size: 222.72 x 125.28 mm (WxH). Dot Pitch: 0.2175 x 0.2088 mm (WxH). Aspect Ratio: 16:9. Resolution: 1024 x 600.
In stock
+ −
Add to wish list
48 - 62
56 57 58 59 60 61 62 63 64 65 66 67 68 69 70
64 - 78