Opto/Illumination

US$7.81
So much power and light from such a small package. This 3W per channel, Triple Output High Power RGB LED is sure to shed a lot of light on any project you add it to. This LED acts as any other LED except they require much more power while delivering a light as intense of a thousand suns going super nova (this is an exaggeration but you know what we mean)! Please be aware that with all three LEDs (9W total output), you will need additional heat sinking.
In stock
+
Add to wish list

US$13.23
These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; we really like this miniature display for its crispness! The design is completely 5V-ready, with an onboard regulator and built in boost converter. It's easier than ever to connect directly to your 3V or 5V microcontroller without needing any kind of level shifter!
In stock
+
Add to wish list

US$0.99

These are 4 pin 5mm RGB Tri-Colored LEDs. Clear, Common Cathode.

In stock
+
Add to wish list

US$21.49
You won't be able to look away from the mesmerizing patterns created by this Adafruit CharliePlex LED Matrix Display Bonnet.  This 16x8 LED display can be placed atop any Raspberry Pi computer with a 2x20 connector, for a beautiful, bright grid of 128 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these Bonnets in a few vivid colors - this is the warm white LED matrix.
In stock
+
Add to wish list

US$21.49
You won't be able to look away from the mesmerizing patterns created by this Adafruit CharliePlex LED Matrix Display Bonnet.  This 16x8 LED display can be placed atop any Raspberry Pi computer with a 2x20 connector, for a beautiful, bright grid of 128 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these Bonnets in a few vivid colors - this is the cool white LED matrix.
Delivery within 2-3 weeks
+
Add to wish list

US$19.95
You won't be able to look away from the mesmerizing patterns created by this Adafruit CharliePlex LED Matrix Display Bonnet.  This 16x8 LED display can be placed atop any Raspberry Pi computer with a 2x20 connector, for a beautiful, bright grid of 128 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these Bonnets in a few vivid colors - this is the green LED matrix.
In stock
+
Add to wish list

US$19.95
You won't be able to look away from the mesmerizing patterns created by this Adafruit CharliePlex LED Matrix Display Bonnet.  This 16x8 LED display can be placed atop any Raspberry Pi computer with a 2x20 connector, for a beautiful, bright grid of 128 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these Bonnets in a few vivid colors - this is the blue LED matrix.
In stock
+
Add to wish list

US$19.95
You won't be able to look away from the mesmerizing patterns created by this Adafruit CharliePlex LED Matrix Display Bonnet.  This 16x8 LED display can be placed atop any Raspberry Pi computer with a 2x20 connector, for a beautiful, bright grid of 128 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these Bonnets in a few vivid colors - this is the yellow LED matrix.
In stock
+
Add to wish list

US$39.98
Hey! Have you ever dreamed of making your own TV set? Here you go, we are introducing LCD TV driver controller board for our electronic enthusiastic. With the help of this board, you can make your own LCD TV and can play channels, Videos, images etc. this board does not require any software or coding. You just need to upload the latest firmware using the USB port provided. This comes with the VGA, USB, HDMI, AV, RF TV interface and suitable for up to 1920 x 1080, 15 to 42-inch LVDS screens. You can use any of these ports for displaying into the LCD screens. The package comes with the IR remote, by which you can select the options on the screen. I am attaching a video link below for your reference.
In stock
+
Add to wish list

US$36.95
This is a TTGO ESP32-WROVER development Board integrated with 12 bits RBG LED, SD card slot and audio jack. With the help of audio jack and LED you can make your own music system. This board also contains MPU9250 Gyroscope sensor. You can program this board using the Arduino IDE. This ESP32 development board has inbuilt WIFI and Bluetooth module which helps us to link up to IOT technology.
Delivery within 2-3 weeks
+
Add to wish list

US$104.99
This is an E-Ink display HAT for Raspberry Pi, 6inch, 800x600 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list

US$51.79
This is an E-Ink raw display, 6inch, 800x600 resolution, communicating via parallel port. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
In stock
+
Add to wish list

US$37.79
480x320, 3.5 inch Touch Screen TFT LCD Designed for Raspberry Pi, 125MHz High-Speed SPI.
In stock
+
Add to wish list

US$44.79
480x320, 4 inch Touch Screen TFT LCD Designed for Raspberry Pi, 125MHz High-Speed SPI.
In stock
+
Add to wish list

US$160.99
This is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience.
In stock
+
Add to wish list