These are 4 pin 5mm RGB Tri-Colored LEDs. Clear, Common Anode.
Get unlimited color combinations by varying the voltages applied to the three separate RGB leads. This can easily be controlled using a microcontroller like the Arduino Uno.
| Specification | |||
| Lens: | Red | Blue | Green |
| Peak Emission wavelength | 625nm | 470nm | 525nm |
| Fwd Voltage (Typical/IF 20ma) | 2.2V | 3.2V | 3.2V |
| Luminous Intensity @ 20ma | 2000mcd | 7000mcd | 15000mcd |
| Max Cont. Forward Current (IF) | 20mA | 20mA | 20mA |
| Viewing Angle | 30 Degrees | 30 Degrees | 30 Degrees |
| Anode Pins (Left to right) | 1 | 3 | 4 |
| Common Anode Pin (Longest Pin) | 2 |
Note: All parameters will vary based on manufacturer LEDs.
WARNING
