Tri-Color 10mm Common Anode Water-clear LED - 4 Leads
This is a common anode water-clear LED. Get unlimited color combinations by varying the voltages applied to the three separate RGB leads. This can easily be controlled using a microcontroller like the Arduino Uno.Â
Â
 Specification |
|||
 Lens: |
 Red |
 Blue |
 Green |
 Peak Emission wavelength  |
 625nm |
 467.5nm |
 520nm |
 Fwd Voltage (Typical/IF 20ma) |
 2.0V |
 3.5V |
 3.5V |
 Luminous Intensity @ 20ma |
 800mcd |
900mcd |
 4000mcd |
 Max Cont. Forward Current (IF) |
 30mA |
 30mA |
 30mA |
 Viewing Angle |
 30 Degrees |
 30 Degrees |
 30 Degrees |
 Cathode Pins (Left to Right) |
 1 |
 4 |
 3 |
 Common Anode Pins (Longest Pin) |
 2 |
Â
Note: All parameters will vary on manufacture LEDs.