These are 4 pin 10mm RGB Tri-Colored LEDs, common cathode.
Get unlimited color combinations by varying the voltages applied to the three separate RGB leads. This can easily be controlled using a microcontroller like the Arduino Uno.
| Specification | |||
| Lens: | Red | Blue | Green |
| Peak Emission wavelength | 625nm | 467.5nm | 520nm |
| Fwd Voltage (Typical/IF 20ma) | 2.0V | 3.5V | 3.5V |
| Luminous Intensity @ 20ma |
600mcd |
750mcd | 300mcd |
| Max Cont. Forward Current (IF) | 30mA | 30mA | 30mA |
| Viewing Angle | 30 Degrees | 30 Degrees | 30 Degrees |
| Cathode Pins (Left to Right) | 1 | 3 | 4 |
| Common Anode Pins (Longest Pin) | 2 |
Note: All parameters will vary based on manufacturer's LEDs.
