12VDC 5M 3528SMD Warm White LED Strip 3200K
These led strips are powerful and glow intensively! Also, they have a density of 240 LEDs per meter, run at 12VDC and consume around 12W maximum per strip. This strip comes with a white background color. There's an adhesive strip on the back which should stick to most clean surfaces.
If you want to dim the strip, use an NPN or N-channel MOSFET (although the big powerful kind is good for a large strip) and PWM the input.
You can cut and shorten the strip for your taste with ease, there are cut-lines every 5 inches (3 LEDs each). Solder wires to the 0.1" copper pads and you're good to go.
Specifications
- Output 12 VDC
- Power: 12 Watts
- LED Quantity: 240 LEDs/m
- Light Color: Warm White (2800-3200K)
- Lumen (Brightness): 436 lm/ft
- Beam Angle: 120 Degrees
- CRI: 80+
- Strip Width: 10mm
- Strip Length: 5 meters (16.4ft)/reel
- Working Temperature: -40 to 45 degrees C.
- Strip Backing Color: White
- Waterproof Rating: IP30
How to get started:
Connection is easy. The LED strip comes with two bare wires already attached to it. Connect the bare wires to the 368-ADA (not included) screw terminal, which in turn connects to our DC-1203-2.1 (12V power supply not included). See the connection diagram.
If you need a dimmer, you can use our LED-STRIP-DIM1 (not included).
Of course, you can use your own power supply (make sure it's 12V and at least 2 amps), or dimmer.
WARNING
