32x32 RGB LED Matrix panel (4mm pitch)
This is a 32x32 RGB LED Matrix Panel. It has 1024 full-color RGB LEDs in all. Each LED can be independently addressed and controlled. It requires at least 13 digital GPIOs to control the LED matrix. The led matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, you can cascade multiple panels and make a huge screen together. BUT Arduino doesn’t support this function, its speed is not enough to multiple panel.
NOTE: This panel needs a 5V@3A power supply. And if you connect 2 or more screen, it needs a high performance controller, such as Mega 2560, Raspberry. .etc.
SPECIFICATION
- Operating voltage: DC 5V
- Average power consumption: <500W/㎡
- Maxim Power Consumption: <1000w/㎡
- Pixel: 32x32=1024
- Level of viewing Angle: ≧160°
- Control mode: Synchronous control
- Drive mode: 1/16 scan rate
- Repetition frequency: ≧60Hz
- White Balance Brightness: ≧1200cd/㎡
- Refresh frequency : ≧300Hz
- MTTF: ≧5000 hours
- Service Life: 75000~100000 hours
- Pixel pitch: 4mm
- Dimension: 128mm*128mm/5.04*5.04 inches
- Thickness: 11mm
DOCUMENTS
SHIPPING LIST
- 32x32 RGB LED Matrix Panel (4mm pitch) x1
- IDC to XH2.54 cable x1
- IDC to IDC cable x1
- Power supply cable x1
WARNING
