DFR0471 32x16 RGB LED Matrix Panel (6mm pitch)

32x16 RGB LED Matrix Panel (6mm pitch)

This is a 32x16 RGB LED Matrix Panel. It has 512 full-color RGB LEDs in all. Each LED can be independently addressed and controlled. It requires at least 13 digital GPIOs to control the LED matrix. The led matrix has 2 IDC connectors (DATA_IN, DATA_OUT) on the back, you can cascade multiple panels and make a huge screen together. BUT Arduino doesn’t support this function, its speed is not enough to multiple panel. 

NOTE: This panel needs a 5V@2A power supply. And if you connect 4 or more screen, it needs a high performance controller, such as Mega 2560, Raspberry. .etc.

SPECIFICATION

• Operating voltage: DC 5V
• Average power consumption: <500W/㎡
• Maxim Power Consumption: <1000w/㎡
• Pixel: 32x16=512
• Level of viewing Angle: ≧160°
• Control mode: Synchronous control
• Drive mode: 1/8 scan rate
• Repetition frequency: ≧60Hz
• White Balance Brightness: ≧1200cd/㎡
• Refresh frequency : ≧300Hz
• MTTF: ≧5000 hours
• Service Life: 75000~100000 hours
• Pixel pitch: 6mm
• Dimension: 192mm*96mm/7.56*3.78 inches
• Thickness: 11mm