WAVE-32511, ESP32-P4-WIFI6 7inch 5-Point Touch Display Development Board, 1024 × 600 Resolution, with OV5647 Camera
ESP32-P4-WIFI6 7inch Touch Display Development Board
High-performance development board based on ESP32-P4 and ESP32-C6
Rich Human-machine Interfaces
Features
ESP32-P4-WIFI6-Touch-LCD-7B is a high-performance development board based on ESP32-P4 chip, with integrated RISC-V 32-bit dual-core and single-core processors. Equipped with 7inch 1024 × 600 touch display, features rich human-machine interfaces including MIPI-CSI (with integrated Image Signal Processor), it also supports USB OTG 2.0 HS for high-speed communication.
The ESP32-P4 chip integrates the Digital Signature Peripheral and a dedicated Key Management Unit, ensuring secure data and operations. Specifically designed for high-performance and high-security applications, to meet the higher requirements of embedded applications such as Human-Machine interaction, efficient edge computing, and IO expansion.
- High-performance MCU with RISC-V 32-bit dual-core and single-core processors
- 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM
- Powerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder
- 32MB PSRAM in the chip's package, with onboard 32MB Nor Flash
- Commonly used peripherals such as MIPI-CSI, MIPI-DSI, USB 2.0 OTG HS, SDIO 3.0 TF card slot, dual microphones (supports echo cancellation), speaker header and RTC battery holder, etc.
- Adapting 2×12 GPIO header with 17 × remaining programmable GPIOs
- Onboard RS485, CAN, I2C, and UART headers for easy communication with industrial equipments
- Security features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation
Display Specifications
| Model | 7inch IPS touch display | |
|---|---|---|
| Resolution | 1024 × 600 | |
| Comm Interface | Supports RGB565, RGB666, RGB888 | |
| Display Panel | IPS | |
| Touch Type | Capacitive touch | |
| Touch Chip | GT911 | |
| Brightness | 350cd/m² | |
| Contrast Ratio | 600:1 | |
| Viewing Angle | 160° | |
| Outline Dimension (H×V) | 99.17 × 164.28 (mm) | |
| Display Area (H×V) | 86.42 × 154.58 (mm) | |
| Color | 16.7M | |
7inch IPS touch screen
160° wide viewing angle, Excellent display performance, high contrast
Capacitive 5-point touch
Supports 5-point sensitive touch, seamlessly combining intuitive operation with rapid response for efficient and convenient development
Supports expanding multiple peripherals
Supports the expansion of multiple peripherals via CAN, RS485, UART and I2C interfaces
Audio input / output
Onboard ES8311 audio codec chip and ES7210 echo cancellation circuit. Meet daily audio application scenarios
Supports AI Speech Interaction
Allows access to online large model platforms such as DeepSeek, Doubao, etc.
Highly integrated & powerful performance
Adopts ESP32-P4-Core module, with built-in ESP32-P4 and 32MB Nor Flash
Wi-Fi 6 and Bluetooth module
Onboard ESP32-C6-MINI module extends 2.4GHz Wi-Fi 6 and Bluetooth 5 (LE) for ESP32-P4, using SDIO interface protocol for stable connection and efficient transmission
What's On Board
- ESP32-P4-Core
integrated ESP32-P4NRW32 and 32MB Nor Flash - ESP32-C6-MINI-1 module
SDIO interface protocol, extending Wi-Fi 6 / Bluetooth 5 (LE) - ESP32-C6 UART header
- ES8311 low-power audio codec chip
for audio encoding and decoding - ES7210 echo cancellation chip
Echo cancellation algorithm chip, used to eliminate echo and improve audio capture accuracy - MIPI DSI LCD interface
for connecting MIPI 7inch LCD - Touch panel connector
- MIPI-CSI (2-lane) camera interface
15Pin pitch 1.0mm connector for connecting MIPI (2-lane) cameras, supports / RPi Camera (B) and other cameras - MX1.25 battery interface (forward polarity)
- PH 2.0 speaker header (non-polarized)
- RTC battery holder
CR1220 size, supports rechargeable 3V~3.3V batteries - Power supply ON/OFF switch
- LED operating status indicator
- Type-A port
USB OTG 2.0 High Speed port - Type-C USB1.1 FS port
for power supply, programming burning, and debugging - USB TO UART Type-C port
for power supply, programming burning, and debugging - RESET button
- BOOT button
Press it when powering on or resetting to enter download mode - PH2.0 4PIN I2C header
for connecting to I2C devices - PH2.0 4PIN UART header
for connecting to UART devices - PH2.0 4PIN CAN header
for connecting to CAN devices - PH2.0 4PIN RS485 header
for connecting to RS485 devices - Onboard microphones
Microphone inputs with echo cancellation - PH2.0 12PIN GPIO headers
with 17 × programmable GPIOs and power supply pins - TF card slot
SDIO 3.0 interface protocol - Reserved space
for placing rechargeable battery
Outline dimensions
