WAVE-28996, 7inch Wide Color Gamut Capacitive Touch Display, 1280×800, HDMI Interface, 10-Point Touch
7" Wide Color Gamut Touch Display
High Resolution | Multi-Touch Point | Full Color
Device & System Support
Raspberry Pi
Supports Raspberry Pi OS, 10-point touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports all versions of Raspberry Pi
Jetson Series
Supports Ubuntu, single point touch, driver free
Supports Jetson Nano / TX2 / Xavier NX / Orin Series boards
PC
Supports Windows 11/10/8.1/8/7, 10-point touch, driver free
How to Install (Raspberry Pi 5 Example)
Prepare below accessories:
Step 1: Connect cable 1, 4 and 5 to the corresponding positions as shown in the picture.
Step 2: Install the Raspberry Pi 5 on the PCB board of the LCD, connect the HDMI adapter to the cable 1 (select HDMI adapter 2 or 3 according to your Raspberry Pi model) and then connect it to the Raspberry Pi Micro HDMI port.
Step 3: Connect the cable 4 to the USB port of the Pi and connect the cable 5 to the GPIO 5V and GND pins as shown.
Step 4: Complete the assembly as shown in the picture and ensure all connections are correct, then connect to a 5V power supply and power on.
Note: for reference only, the Raspberry Pi 5 is not included.
Technology Upgrade, Better Image Quality
1280x800 Resolution, Provides Clear Image and Vivid Color Display Effect
IPS Display Panel
Excellent Display Performance With 178 degrees Wide Viewing Angle
Wide Color Gamut LED Technology
NTSC 68%, Chroma increases 58.3%
Capacitive 10-Point Touch
Supports DDC/CI Brightness Adjustment
Dual-Track Speaker
Ferrite Hi-Fi Speaker, Stereo Sound Effect, Better Sound Quality
Interface Introduction
- Backlight ON/OFF
- HDMI Standard Interface
- HDMI FFC Connector
- Type-C Touch Port
- Type-C Power Supply Port
- 3.5mm Audio Jack
- Button Board Haeder
- 3PIN PH2.0 Power Supply Header
- 4PIN PH1.25 Touch Header
- M2.5 Mounting Standoff
Dimensions
WARNING
