WAVE-30897, 3.5inch Resistive Touch Display (G) for Raspberry Pi, IPS Panel, 320×480 Resolution, Immersion Gold Process, 262K Color
3.5inch Resistive Touch Display for Raspberry Pi
Embedded ST7796S driver and XPT2046 Resistive touch control chip
Comes with examples for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino

Note: The display orientation is portrait by default, 320×480 resolution (H×V). Change the software config for landscape display.
Features at a glance
- 262K color display with 320 × 480 resolution for excellent visual effects
- High touch screen transmittance, fast response, sensitive touch, and long lifetime
- Embedded with ST7796S driver chip and XPT2046 resistive touch control chip, using SPI communication, minimizes required IO pins
- Supports Pigo pin communication and GH1.25 11PIN cable connection
- Adopts Immersion Gold process, nice looking, with better durability
- Comes with online development resources and manual (examples for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino)
Specifications
Operating Voltage | 5V | Logic level | 3.3V |
---|---|---|---|
Display Driver | ST7796S | Touch Driver | XPT2046 |
Display Interface | 4-wire SPI | Touch Interface | SPI |
Display Panel | IPS | Display size | 3.5inch |
Touch Type | Resistive | Touch Points | Single-point touch |
Display Size | 49.66 × 74.29mm | Touch panel Size | 54.26 × 83.62mm |
3.5inch Resistive Touch Display
Embedded with ST7796S Driver Chip And XPT2046 Resistive Touch Control Chip

Smooth and stable display
Highly compatible with Raspberry Pi desktop OS, supports smooth and stable operation

IPS Display Panel
Excellent Display Performance, 262K color, wide viewing angle

High Refresh Rate
Supports 60Hz high refresh rate for a smoother operating experience
Suitable For Multiple Programming Platforms
Comes with demos and manuals for Raspberry Pi / Raspberry Pi Pico / ESP32 / Arduino.
More convenient for development and integration, with high expandability.

SPI and I2C Control Interfaces
Options for GH1.25 11PIN connector or Pigo pin for connecting the LCD to the host board

Pin | Description | 11PIN Pin No. |
---|---|---|
TP_IRQ | Touch panel Interrupt pin | 1 |
TP_CS | Touch panel Chip Selection | 2 |
LCD_BL | LCD Backlight pin | 3 |
LCD_RST | LCD Reset pin, low active | 4 |
LCD_DC | LCD Data/Command selection (high for data, low for command) | 5 |
LCD_CS | LCD Chip Selection, low active | 6 |
SCLK | SPI CLK pin | 7 |
MOSI | SPI MOSI pin | 8 |
MISO | SPI MISO pin | 9 |
GND | Ground | 10 |
VCC | 5V Power input | 11 |
Hardware Connection
Connecting with Raspberry Pi 5

Connecting with Raspberry Pi 4B

Connecting with Raspberry Pi Zero 2 W

Connecting with ESP32-S3 development board

Note: For reference only, the Raspberry Pi boards and ESP32-S3 development board are NOT included.
Dimensions
