WAVE-30737, RP2350 1.43inch AMOLED Display Development Board, 466×466, SPI Interface Round Display with Metal Case
RP2350 1.43inch AMOLED Development Board
466 × 466 Resolution, AMOLED Round Display, Onboard Multiple Interfaces
Product Features
This product uses the RP2350 chip with built-in high-capacity Flash memory and a 1.43-inch AMOLED display, capable of smoothly running GUI applications such as LVGL. It includes a rich set of peripheral resources like an RTC chip, QMI8658 6-axis IMU, TF card slot, and Lithium battery header, with reserved USB, UART, I2C, and GPIO pin headers for expandability.
- Dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V processor, up to 150 MHz
- 520KB of SRAM and 16MB onboard Flash memory
- 1.43-inch AMOLED display, SPI interface, 466 × 466 resolution, 16.7M colors
- Supports capacitive touch function via I2C interface, with interrupt support
- Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope)
- Onboard PCF85063 RTC chip with SH1.0 battery header (supports charging)
- Onboard RST and BOOT side buttons
- 3.7V MX1.25 Lithium battery recharge/discharge header
- TF card slot for external storage
- USB Type-C port for power, programming, and debugging
- UART and I2C SH1.0 4PIN connectors, reserved 2 × 14PIN 1.27mm pitch GPIO headers
- Optional CNC metal case with a colorful label for easy identification
AMOLED Display Parameters
| Display Panel | AMOLED | Display Size | 1.43 inch |
|---|---|---|---|
| Resolution | 466×466 | Display Colors | 16.7M |
| Brightness | 350 cd/㎡ | Contrast Ratio | 60000:1 |
| Communication Interface | SPI | Driver IC | C05300 |
| Touch | Supported | Touch IC | FT6146 |
Adopts AMOLED Screen
The next-generation display technology, compared to traditional LCD displays, features precise light control, more vibrant colors, and better image details.
178° Wide Viewing Angle
Excellent display performance with 16.7M colors and a wide viewing angle.
Supports C/C++, MicroPython, and Arduino IDE
Interface Definition
Supports multiple GPIO interfaces for flexible development.
What's On Board
- RP2350A - Dual-core and dual-architecture design, up to 150 MHz
- W25Q128JVSIQ - 16MB NOR-Flash
- QMI8658 - 6-axis IMU (3-axis gyroscope + 3-axis accelerometer)
- PCF85063 - RTC chip
- MX1.25 Battery Header - For 3.7V Lithium battery, supports charging and discharging
- TF Card Slot - Located on the back of the PCB
- RTC Battery Header - For connecting rechargeable RTC battery
- I2C 4PIN Connector
- Charge Indicator
- USB Type-C Connector - For programming and USB 1.1 device/host support
- Power Indicator
- UART 4PIN Connector
- BOOT Button - Press when resetting to enter download mode
- Reset Button
- ETA6098 - High-efficiency Lithium battery recharge manager
- MP1605GTF-Z - DC-DC power chip
Dimensions
WARNING
