WAVE-32867, RP2350 1.46inch Capacitive Touch Round Display Development Board, 480×480 IPS Panel Display, 65K Color

Price:
CA$42.75
WAVE-32867
Delivery within 2-3 weeks
+
Add to wish list

WAVE-32867, RP2350 1.46inch Capacitive Touch Round Display Development Board, 480×480 IPS Panel Display, 65K Color

RP2350 1.46″ LCD Development Board

Integrates QSPI interface display, multiple peripheral interfaces

Features

RP2350-Touch-LCD-1.46 is a high-performance microcontroller development board designed by Waveshare. Tiny size with onboard 1.46inch capacitive touch IPS screen, RTC chip, 6-axis IMU, TF card slot, and more, allowing fast development and integration.

  • RP2350B microcontroller chip designed by Raspberry Pi
  • Dual-core, dual-architecture design: dual ARM Cortex-M33 or dual Hazard3 RISC-V processors, up to 150 MHz
  • 520KB Static RAM, 16MB onboard Flash memory
  • Type-C connector for easy use
  • 1.46inch LCD display, 412×412, 65K color
  • 5-point capacitive touch over I2C with interrupt
  • 3.7V MX1.25 lithium battery recharge/discharge header
  • USB 1.1 with device and host support
  • Low-power sleep and dormant modes
  • Drag-and-drop programming via USB mass storage
  • 14 × Multi-Function GPIO pins
  • 2 × I2C, 2 × UART, 7 × 12-bit ADC, 12 × PWM channels
  • Accurate clock and timer
  • Temperature sensor
  • 12 × Programmable I/O (PIO) state machines

IPS Display Panel

65K color, 412×412 resolution, wide viewing angle

Capacitive 5-point touch

5-point capacitive touch over I2C with interrupt support

Onboard audio codec chip

Supports high-quality audio processing with clear input/output.

Dual-core, dual-architecture

The RP2350B supports dual ARM Cortex-M33 or dual Hazard3 RISC-V cores, enabling flexible software development.

Supports C/C++, MicroPython, Arduino IDE

Comprehensive SDK, dev resources, and tutorials included.

What's On Board

  1. RP2350B
    Dual-core, dual-architecture, up to 150MHz
  2. QMI8658
    6-axis IMU (3-axis gyro + 3-axis accelerometer)
  3. 1.27mm pin header
    GPIO and function pins
  4. RTC chip
    PCF85063
  5. Battery recharge manager
  6. Microphone
  7. RTC battery header
    for connecting rechargeable RTC battery
  8. Power indicator
  9. USB Type-C port
    Programming, USB 1.1 with device/host
  1. Charge indicator
    Lights when charging, off when full
  2. BOOT button
    Hold on reset to enter download mode
  3. ES8311
    Low-power audio codec
  4. 16MB Flash
  5. Speaker
  6. PWR button
    Power ON/OFF, custom functions supported
  7. MX1.25 battery header
    3.7V Lithium battery, supports charge/discharge
  8. TF card slot
  9. Amplifier chip

Interface definition

Multiple onboard interfaces for flexible expansion

Outline dimensions

Wiki: www.waveshare.com/wiki/RP2350-Touch-LCD-1.46