WAVE-30499, 1.47inch LCD Display Module With Touch Panel, 172×320 Resolution, 262K Display Color
1.47inch Touch LCD Display Module
Embedded JD9853 Driver and AXS5106L Capacitive Touch Control Chip
Features
- 172×320 resolution, 262K colors, clear and colorful displaying effect
- High touch screen transmittance, fast response and long lifetime
- Embedded JD9853 driver chip and AXS5106L capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins, supports controller boards like Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino
- Comes with online development resources and manual (examples for Raspberry Pi / ESP32S3 / Raspberry Pi Pico / Arduino)
Specifications
OPERATING VOLTAGE: 3.3V / 5V
RESOLUTION: 172 × 320 pixels
DISPLAY DRIVER: JD9853
TOUCH DRIVER: AXS5106L
DISPLAY INTERFACE: 4-wire SPI
TOUCH INTERFACE: I2C
DISPLAY PANEL: IPS
TOUCH TYPE: Capacitive
DISPLAY SIZE: 17.75 × 32.93mm
MODULE SIZE: 22.05 × 41.69mm
Onboard Voltage Translator
Compatible with 3.3V/5V Power Input
SPI and I2C Control Interfaces
Embedded JD9853 driver and AXS5106L capacitive touch control chip
VCC: Power (3.3V / 5V input)
GND: Ground
MISO: SPI MISO pin
MOSI: SPI MOSI pin
SCLK: SPI Clock pin
LCD_CS: LCD Chip Selection, low active
LCD_DC: LCD Data/Command selection (high for data, low for command)
LCD_RST: LCD Reset, low active
LCD_BL: LCD Backlight
TP_SDA: TP Data pin
TP_SCL: TP Clock pin
TP_INT: TP Interrupt pin
TP_RST: TP Reset, low active
Usage Examples
Connecting with Raspberry Pi 5
Connecting with ESP32-S3
For reference only.
Dimensions
WARNING
