WAVE-29063, 2inch Capacitive Touch Display Module, IPS Display, 240×320 Resolution
2inch Capacitive Touch LCD Module
Embedded ST7789T3 Driver and CST816D Capacitive Touch Control Chip
Features at a Glance
- 240×320 resolution, 262K colors, clear and colorful displaying effect
- High touch screen transmittance, fast response and long lifetime
- Embedded with ST7789T3 driver chip and CST816D capacitive touch control chip, using SPI and I2C communication respectively, minimizes required IO pins
- Adapting 15PIN connector and 18PIN FPC slot for connecting the LCD module to the host board
- Onboard voltage translator, compatible with 3.3V / 5V operating voltage
- Comes with online development resources and manual (examples for Raspberry Pi / ESP32 / Raspberry Pi Pico / Arduino)
Specifications
Operating voltage: 3.3V/5V
Display Driver: ST7789T3
Display Interface: 4-wire SPI
Display Panel: IPS
Pixel Pitch: 0.1275 x 0.1275 mm
Display Size: 30.6 x 40.8 mm
Resolution: 240 x 320 pixels
Touch Driver: CST816D
Touch Interface: I2C
Touch Type: Capacitive
Touch Points: Single point touch
Module Size: 37.1 x 58.8 mm
Onboard Voltage Translator
Compatible with 3.3V / 5V Operating Voltage
Onboard TF Card Slot
For storing more pictures or files
Suitable for Multiple Programming Platforms
Raspberry Pi, Raspberry Pi Pico, ESP32, Arduino Boards
SPI and I2C Control Interfaces
Options for 15pin connector or 18 pin FPC slot for connecting the LCD to the host board
Hardware Connection
Raspberry Pi 5 Example
ESP32-S3 Example
For reference only: Pi 5 and ESP32-S3 are not included.
Dimensions
WARNING
