1.3inch OLED Display Module, Black / White Display Color, 64×128 Resolution, SPI / I2C Interface
1.3" OLED DISPLAY MODULE
Embedded SH1107 Driver, Using SPI / I2C Bus
Comes with examples for Raspberry Pi, Arduino, STM32, etc.
.jpg?1597255257507)
Features At A Glance
- Adopts both 4-wire SPI and I2C interfaces, better compatibility, high transmission rate
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
Specifications
| OPERATING VOLTAGE | 3.3V | RESOLUTION | 64 × 128 pixels |
|---|---|---|---|
| COMMUNICATION INTERFACE | 4-wire SPI, I2C | DISPLAY SIZE | 14.70 × 29.42mm |
| DISPLAY PANEL | OLED | PIXEL SIZE | 0.15 × 0.15mm |
| DRIVER | SH1107 | DIMENSIONS | 30.0 × 39.5mm |
SPI Control Interface
Supports Controller Boards Like Raspberry Pi/Arduino/STM32
.jpg?1597255610231)
| VCC | Power (3.3V input) |
|---|---|
| GND | Ground |
| DIN | data input |
| CLK | clock input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
Hardware Connection
Connecting With Raspberry Pi
.jpg?1597255678861)
Connecting With Arduino Board
.jpg?1597255729386)
Living Example
.jpg?1597255773787)
Outline Dimensions
.jpg?1597255812234)
Resources & Services
.jpg?1597255849921)
Wiki: 1.3inch_OLED_Module_(C)
