WAVE-29792, 10.85inch e-Paper display (G) — e-ink display, 1360x480, Red/Yellow/Black/White, SPI Interface (With Driver HAT)
10.85″ e-Paper (G)
Low power, wide viewing angle, paper-like effect without electricity.
Ideal for price tags, shelf labels, industrial instruments...
Features at a glance
- No backlight, keeps displaying last content for a long time even when powered down
- Ultra low power consumption — power is mainly required for refreshing
- Comes with online development resources and manual (e-Paper Driver HAT circuit diagram, examples for Raspberry Pi / Arduino / STM32)
- Optional for e-Paper Driver HAT:
- Standard Raspberry Pi 40PIN GPIO extension header — supports Raspberry Pi series boards
- Adopts Raspberry Pi HAT+ standard to improve interoperability and ease development
- SPI interface for connecting with Raspberry Pi, ESP32, Arduino, STM32, etc.
- Onboard voltage translator — compatible with 3.3V / 5V MCUs
Specifications
| Operating Voltage | Raw display: 3.3V With driver board: 3.3V / 5V |
Display Color | Red / Yellow / Black / White |
|---|---|---|---|
| Interface | 3-wire SPI, 4-wire SPI | Grey Scale | 2 |
| Outline Dimensions | Raw display: 270.56 × 105.92 × 1.20 mm With driver board: 65.00 × 30.50 mm |
Full Refresh Time | 21s |
| Display Size | 259.76 × 91.68 mm | Refresh Power | <70mW |
| Dot Pitch | 0.191 × 0.191 mm | Standby Current | <0.01uA (almost none) |
| Resolution | 1360 × 480 pixels | Viewing Angle | >170° |
Advantages of EINK
E-paper displays use microcapsule electrophoretic technology: charged particles suspended in a fluid move under an electric field, reflecting ambient light like traditional paper. No backlight is needed, and it offers nearly 180° viewing angles. Ideal for applications like e-readers.
e-Paper Driver HAT
Onboard SPI Control Interface for use with Raspberry Pi, Arduino, ESP32, STM32, etc.
| VCC | 3.3V / 5V |
|---|---|
| GND | Ground |
| DIN | SPI MOSI pin |
| SCLK | SPI SCK pin |
| CS_M | e-paper M area chip select (low active) |
| CS_S | e-paper S area chip select (low active) |
| DC | Data / Command select (high = data, low = command) |
| RST | External reset (low active) |
| BUSY | Busy status output |
| PWR | Power control pin |
Onboard Voltage Translator
Compatible with 3.3V / 5V MCUs.
Dimensions
WARNING
