WAVE-28995, 2.15inch E-Paper Display (G), E-Ink Display, 296x160, Red/Yellow/Black/White, SPI Interface with driver board
2.15" E-Paper (G)
Low Power, Wide Viewing Angle, Paper-Like Effect Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Features at a Glance:
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi / Jetson Nano / RDK X3 / Arduino / STM32)
- E-Paper driver board:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3
- Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
- Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
Specifications:
Operating Voltage:
- Raw display: 3.3V
- With driver board: 3.3V/5V
Display Color:
Red/Yellow/Black/White
Interface:
3-wire SPI, 4-wire SPI
Grey Scale:
2
Outline Dimensions:
- Raw display: 60.8 × 31.8 × 1.00 mm
- With driver board: 65 × 34 mm
Display Size:
48.10 × 26 mm
Dot Pitch:
0.1625 × 0.1625 mm
Resolution:
296 × 160 pixels
Full Refresh Time:
20s
Refresh Power:
<50mW
Standby Current:
<0.01µA (almost none)
Viewing Angle:
170°
Advantages of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Standard Raspberry Pi 40Pin GPIO Header
Compatible with Raspberry Pi Series Boards, Jetson Nano, RDK X3
For reference only: Raspberry Pi boad in the picture is not included.
E-Paper Driver Board
Onboard SPI Control Interface, for use with controller boards like Raspberry Pi / Arduino / STM32
Onboard Voltage Translator
Compatible with 3.3V / 5V MCUs
Dimensions
WARNING
