Our Brands

Interconnects

83 - 97
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
99 - 113
Newest Items First
15 Per Page
SIMM-72D Dual row 72 pin SIMM socket connector
SIMM-72D Dual row 72 pin SIMM socket connector
US$6.99

Locking tabs-Tinned contacts-Keyed mounting posts-Memory module sockets.

In stock
+ −
Add to wish list
PRT-08534 RJ45 Ethernet MagJack-Compatible
PRT-08534 RJ45 Ethernet MagJack-Compatible
US$5.14
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you'll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, and shielding.
Delivery within 2-3 weeks
+ −
Add to wish list
874-ADA Snap-action 5-Wire Block Connector (12-28 AWG) - Pack of 3
874-ADA Snap-action 5-Wire Block Connector (12-28 AWG) - Pack of 3
US$8.67
Each block connector has a metal block inside and five levers that snap open and close to bind stranded/solid-core wire. No screwdrivers required! They're super handy for free wiring and can handle up to 20A at 300V with UL listing so you can also use them for mains wiring. Use any wires from 12 AWG down to 28 AWG. 
In stock
+ −
Add to wish list
737-ADA Power Distribution Bus - 7 x 6mm diameter solid brass
737-ADA Power Distribution Bus - 7 x 6mm diameter solid brass
US$3.42
These machined bus bars are for when you want to distribute power through a project, we think they are ideal for robots and LED pixel grids where you have tons of current and a lot of loose wiring to control.
In stock
+ −
Add to wish list
988-ADA USB A Jack to 5.5/2.1mm jack adapter
988-ADA USB A Jack to 5.5/2.1mm jack adapter
US$5.17
This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. 
In stock
+ −
Add to wish list
920-ADA SMA Jack to RP-SMA Plug RF Adapter
920-ADA SMA Jack to RP-SMA Plug RF Adapter
US$6.03
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with an SMA jack on one end and an RP-SMA Plug on the other.
In stock
+ −
Add to wish list
919-ADA RP-SMA Jack to SMA Plug RF Adapter
919-ADA RP-SMA Jack to SMA Plug RF Adapter
US$6.03
This RF adapter bit is great for anyone doing RF work. Depending on the dev-board and antenna you have, you may be faced with either RP-SMA or SMA connectors. Unfortunately they are not compatible! This adapter solves the problem with a RP-SMA jack on one end and an SMA Plug on the other.
In stock
+ −
Add to wish list
SJ002B Keystone Dual Surface Box
SJ002B Keystone Dual Surface Box
US$4.89
This is a dual surface box with a sticky adhesive and screw mounting for keystone category 5E modular connection. 
In stock
+ −
Add to wish list
COM-11707 Barrel Jack Extension Cable - M-F (6 ft)
COM-11707 Barrel Jack Extension Cable - M-F (6 ft)
US$4.64
This cable is terminated with 5.5x2.1mm barrel connectors, one male and one female, and fits most of our products that use a DC barrel jack for power (RedBoard, RaspiRobot board, etc.).
In stock
+ −
Add to wish list
1283 SMT Test Socket - SOIC-16 Narrow Breakout
1283 SMT Test Socket - SOIC-16 Narrow Breakout
US$38.42
Yeah, that's right, now you can program and test out your favorite new parts in SOIC-16 or smaller packages. This test socket is good for any SOIC/SOP "Narrow" chip in a 150mil wide body that has 16 pins or fewer. Simply press down on the top, place the chip in carefully and then release to latch the chip in.
In stock
+ −
Add to wish list
1281 SMT Test Socket - SOIC-28 Wide Breakout
1281 SMT Test Socket - SOIC-28 Wide Breakout
US$52.42
Yeah, that's right, now you can program and test out your favorite new parts in SOIC Wide packages. This test sockets is good for any wide (300 mil) SOIC/SOP with up to 28 pins. Simply open the latch, place the chip in carefully and then close the top over it. The chip is held securely against gold 'fingers' in the socket.
In stock
+ −
Add to wish list
394 Pogo Pins (10 pack) - P75-LM3
394 Pogo Pins (10 pack) - P75-LM3
US$13.13
These particular pins are (in our opinion) ideal because they are skinny enough to fit into proto board or perf board - they have a 1.0mm/0.04" diameter body (the gold part) but the spring contact head is 1.5mm (0.06") wide. The uncompressed length is 16.5mm/0.65", compressed is 14mm/0.55"
Delivery within 2-3 weeks
+ −
Add to wish list
725 Terminal Block - 3-pin 3.5mm - pack of 5!
725 Terminal Block - 3-pin 3.5mm - pack of 5!
US$6.92
These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy to adjust with a screwdriver, and not too chunky. The only down-side is that they do not fit into 2.5mm spaced holes (they're 3.5mm spaced) - but they do fit in most perf/proto-board if you rotate them diagonally.
In stock
+ −
Add to wish list
373 Breadboard-friendly 2.1mm DC barrel jack
373 Breadboard-friendly 2.1mm DC barrel jack
US$1.67
This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboards.
In stock
+ −
Add to wish list
610 Panel Mount 2.1mm DC barrel jack
610 Panel Mount 2.1mm DC barrel jack
US$5.17
This power jack is designed to easily attach to a panel up to 8mm thick (0.315" or 5/16") and fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project enclosure.
In stock
+ −
Add to wish list
83 - 97
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
99 - 113